Instagram @bloodvette
Corvette C7 Stage 3.5 Aerodynamic Full Body Kit STAGE 3.5 #Aerokit #CorvetteParts https://cimg7.ibsrv.net/gimg/www.cor...0c0cef14b4.jpg https://cimg9.ibsrv.net/gimg/www.cor...fe6359f7e1.jpg https://cimg8.ibsrv.net/gimg/www.cor...2148f78709.jpg |
Is the weave for the front splitter the same as factory? It looks quite different from the pics on the site, but I can't tell for sure. Also, do you have stage 3 winglets in carbon fiber? I only see them in carbon flash on the site.
|
Originally Posted by Toddiesel
(Post 1599351947)
Is the weave for the front splitter the same as factory? It looks quite different from the pics on the site, but I can't tell for sure. Also, do you have stage 3 winglets in carbon fiber? I only see them in carbon flash on the site.
|
Originally Posted by ExtremeOnlineStore
(Post 1599352134)
The sharp of the front splitter is the same as the OEM one. Unfortunately, we just offer the stage 3 winglets is Carbon Flash.
https://cimg9.ibsrv.net/gimg/www.cor...3117123cb9.jpg https://cimg7.ibsrv.net/gimg/www.cor...5555a0cabd.jpg |
*cricket*
|
Originally Posted by Toddiesel
(Post 1599352160)
I'm guessing by "sharp" you meant shape? And yes, I can tell that much. I'm asking about the carbon fiber weave pattern. I've learned the hard way that it can look pretty bad if they're different. Like if you had the below weaves near each other, it would look poopy.
https://cimg9.ibsrv.net/gimg/www.cor...3117123cb9.jpg https://cimg7.ibsrv.net/gimg/www.cor...5555a0cabd.jpg |
Originally Posted by ExtremeOnlineStore
(Post 1599357000)
All the carbon fiber product are produced by 3K Twill Weave Carbon Fiber.
|
Originally Posted by ExtremeOnlineStore
(Post 1599474304)
PM Replied
|
PM Replied
|
I just received my order... CF fender well extensions. Product arrived two days early They look nice and match all the other quality CF products I have but, No pre-drilled holes that was a bit disappointing considering there wasn't a price difference from my research and there wasnt any hardware provided.
|
Originally Posted by Panth3r
(Post 1599514881)
I just received my order... CF fender well extensions. Product arrived two days early They look nice and match all the other quality CF products I have but, No pre-drilled holes that was a bit disappointing considering there wasn't a price difference from my research and there wasnt any hardware provided.
|
Extreme Online Store Corvette C7 Parts & Accessories
SHOP NOW Aero Package - Front Splitter / Ground Effect - Side Skirts / Rocker Panels - Rear Trunk Spoiler Bumper Grill - Diffuser Fins - Tow Hook License Plate ........................................ ........................................ ........................................ ........................................ .. |
These guys are great. Had to replace one of the tall winglets on my front splitter. Their stuff is perfect.
|
I ordered your winglets and wickerbill 2 weeks ago which came damaged. How long is it going to take to resolve this?
|
Originally Posted by R8Z51
(Post 1600845872)
I ordered your winglets and wickerbill 2 weeks ago which came damaged. How long is it going to take to resolve this?
|
Originally Posted by ExtremeOnlineStore
(Post 1601117222)
PM Replied
|
Originally Posted by Bluebeast64
(Post 1601120236)
I buy from you a complete package of carbon fiber for $1500.00 and the tail center piece is not Carbon fiber or the front end of the splitter too,
|
Originally Posted by ExtremeOnlineStore
(Post 1601442513)
Correct. For our Stage 3 Aerodynamic Kit, the rear central spoiler and the front side winglets will be carbon flash.
|
PM sent regarding wing installation. Thanks.
|
All times are GMT -4. The time now is 12:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands