1976 corvette autocross project
Hi guys I知 new to this forum. Currently have a 76 Vette I壇 like to make a street/autocross car. I致e got a new 750 Holley carb, 4 bolt main cammed 355. Is really appreciate some input on upgrading the still stock suspension. I don稚 wanna go cheap at all but I壇 like to do the project little by little without making the car unusable and without completely breaking the bank. Any info is appreciated. Let her rip!
|
Does the autocross group you run with have any restrictions on modifications that wont effect what class you run in?
Do you have a maximum dollar amount to invest? A cheap place to start is front and rear sway bars and shock absorbers. Beyond that increasing wheel and tire width. Going further would be front and rear spring changes. Still further would be complete changes to the type of front and rear suspension. |
I知 not sure . I知 located in CT and I have Limerock and stafford springs as local race tracks but I am willing to travel within New England to go to events. I am new and just getting into the sport so any recommendations are welcome .
|
Id find these places and see what their class rules are before you start spending money
|
Thanks will do for sure. The group I believe is the SCDA and I think I知 going to go for the open classes to start off.
|
Originally Posted by Dbcrusader36
(Post 1599412937)
I知 not sure . I知 located in CT and I have Limerock and stafford springs as local race tracks but I am willing to travel within New England to go to events. I am new and just getting into the sport so any recommendations are welcome .
Before deciding on what modifications you want to do, you really should reach out to some of the local SCCA Regions, and/or other sports car clubs, such as Porsche Club of America (PCA), to see what classes they run, and what modifications are allowed. Your best bet might be to show up at an autocross, watch, ask questions of the organizers and participants, and maybe even enter your car in it's current stock condition, to get a feel for what it's like and to have a baseline for the future. I did a lot of autocrossing in the 70's and 80's, in Corvettes and other cars, and really enjoyed it. My avatar picture is me autocrossing my 62, around 1978. This website will give you a calendar of events in the Northeast, and a little background on autocross. https://www.autox4u.com/ |
Thank you very much!! I will definitely be reaching out and would be stoked to show up and see the sport in action and learn more.
|
Something to keep in mind is that in autocross, aside from seat time, tires are the most critical element to making the car turn respectable times. It's important to understand that the best tires for autocross are not manufactured in 15" sizes appropriate for Corvettes, the 15" sizes are all very small for Miata's and such. The various organizations that host autocross have unique rules to allow 1" upsizing or downsizing the wheel diameter to open up tire options (SCCA, while NCCC allows +/-1" on diameter and width) and still stay in stock class. Going to 17's or bigger will bump you out of stock into a modified category, which is fine if that is what you want to do. If you run SCCA and plan to upsize wheels to 17" or more, you might want to look into the CAM-S class (Classic American Muscle-Sports), which allows for almost any modification but is restricted to high performance street tires (200 TW such as BFG Rival S or Bridgestone RE-71R). The drawback to CAM-S is that it allows Corvettes all the way up to current models.
|
What would you recommend for a first event?
|
Originally Posted by Dbcrusader36
(Post 1599414284)
What would you recommend for a first event?
|
Limerock has a page devoted to autocross
http://limerock.com/summer-autocross-days |
...
|
Is that something I should look into? I was wondering if Von steel was the way to go?
|
What are recommendations for new shocks? I知 thinking about getting the whole set of Bilstein sport shocks as my next upgrade.
|
Originally Posted by Dbcrusader36
(Post 1599430223)
What are recommendations for new shocks? I知 thinking about getting the whole set of Bilstein sport shocks as my next upgrade.
|
Originally Posted by Kacyc3
(Post 1599427310)
All depends on your class limitations.
https://cimg2.ibsrv.net/gimg/www.cor...40e9ee754f.png THESE ARE NOT GLOBAL WEST A-Arms. They are aftermarket A-arms that fit early model full size Chevy cars. They can be bought for less than $200 thru Jeg's, Summit, ebay, etc. Check out our thread on these and what it takes to make them fit. Posted same info on the guy's Facebook page. Buyers beware. https://www.corvetteforum.com/forums...ar-a-arms.html 23 pages of information in this thread here...... Better have some skills to make them work. Welding, machining and re-coating all needed. Bman :thumbs: |
THESE are what the real Global West look like.
Notice the Global West label, the different ball joints and the real giveaway......the cross shaft on the real ones are a direct bolt on. The ones on the FB guy's need serious machining. https://www.summitracing.com/parts/g...model/corvette |
In addition to reading the rules, before you start throwing money at mod's I recommending reading up on these suspensions. They are unique and the more you learn, the less chance for making huge errors. This is a very good article to start with Vette Improvement Program (VIP).
Other good articles can be found here http://www.corvettefaq.com/c3/ You don't have to spend a ton of money to get C3's to handle quite well if you can turn a wrench and do some light fabrication. |
Originally Posted by bmans vette
(Post 1599431913)
THESE are what the real Global West look like.
Notice the Global West label, the different ball joints and the real giveaway......the cross shaft on the real ones are a direct bolt on. The ones on the FB guy's need serious machining. https://www.summitracing.com/parts/g...model/corvette |
Originally Posted by Jason Staley
(Post 1599431993)
In addition to reading the rules, before you start throwing money at mod's I recommending reading up on these suspensions. They are unique and the more you learn, the less chance for making huge errors. This is a very good article to start with Vette Improvement Program (VIP).
Other good articles can be found here http://www.corvettefaq.com/c3/ You don't have to spend a ton of money to get C3's to handle quite well if you can turn a wrench and do some light fabrication. |
All times are GMT -4. The time now is 09:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands