1967 Convertible Project Car
https://cimg8.ibsrv.net/gimg/www.cor...90442ae42.jpeg
https://cimg2.ibsrv.net/gimg/www.cor...75f09069a.jpeg https://cimg2.ibsrv.net/gimg/www.cor...89dec575e.jpeg https://cimg0.ibsrv.net/gimg/www.cor...c9e143dac.jpeg https://cimg9.ibsrv.net/gimg/www.cor...40ee88302.jpeg https://cimg1.ibsrv.net/gimg/www.cor...89ecc10d7.jpeg https://cimg0.ibsrv.net/gimg/www.cor...d26313a41.jpeg https://cimg9.ibsrv.net/gimg/www.cor...1715f69d2.jpeg https://cimg7.ibsrv.net/gimg/www.cor...81b8c141a.jpeg https://cimg6.ibsrv.net/gimg/www.cor...f18c9d7ab.jpeg https://cimg6.ibsrv.net/gimg/www.cor...174eb4088.jpeg https://cimg8.ibsrv.net/gimg/www.cor...6f6d5a676.jpeg https://cimg9.ibsrv.net/gimg/www.cor...5705da2cd.jpeg Ok, after surgery on both hands and now possibly looking at a second back surgery, and a bunch of other old guy aches and pains, I'm seriously considering selling my 67'. There is no rust in the birdcage as should be expected from a California car. The original Vin and Trim tags are intact.( green over black) The car was wrecked over 40 years ago and had been sitting till I purchased it two years ago. A perfect undamaged 67’ chassis has been acquired and completely redone with Global West front coil overs and Del-A-Lum bushings. The rear is Global West off set trailing arms with Johnny joints instead of rubber bushings. It has all new brake and fuel lines as well as Borgesen Power Steering conversion. The body is mostly a shell from the firewall back. I have a pair of GTS 1" wider quarter panels, a new tail lamp panel and all needed bonding strips to install. I have an original 67' BB hood that looks NOS but I know it was installed on a 66' at one point but not painted. I have seats, dash, Gauges, radio, convertible top, grill, and a bunch of other parts, too many to list. All pieces need to be refurbished but are very nice. There are also some new bits like emblems, tail lamps, and other small stuff. There is no front body fiberglass. I have a clean California title in my name / plates. I know there will be questions, so ask away. I was going for a mild restomod style. I figure the value should be around 25K so that's where I'm starting at. Every thing is negotiable to a point. PM me for contact info. You can also see my other posts for the work performed on this car till then. Thanks For Any Interest, Chris |
https://cimg7.ibsrv.net/gimg/www.cor...302ef1de8.jpeg
https://cimg9.ibsrv.net/gimg/www.cor...50cba211d.jpeg https://cimg0.ibsrv.net/gimg/www.cor...b1f379afb.jpeg Update, I have added a complete front clip w/inner fenders and headlight assembly’s to the deal. Price is unchanged @ 25K Chris |
TTT with requested pictures of the front clip
|
Wish you were closer. Good luck with the sale!
|
Check you inbox
Originally Posted by MrTrim
(Post 1599615740)
https://cimg7.ibsrv.net/gimg/www.cor...302ef1de8.jpeg
https://cimg9.ibsrv.net/gimg/www.cor...50cba211d.jpeg https://cimg0.ibsrv.net/gimg/www.cor...b1f379afb.jpeg Update, I have added a complete front clip w/inner fenders and headlight assembly’s to the deal. Price is unchanged @ 25K Chris |
Kelly,
no request in my inbox. Tried sending you a pm but your inbox is full. If interested, please try again or empty your inbox. Chris |
Done
I just cleared my inbox
|
Just an update, just found a box with 4 decent, not bent driver quality, bumpers to add to the pile...also a restored clock and an original restored interior rear view mirror...same price with added parts. all the parts I have go with the car. if I find more I'll add to the listing.
Thanks for all the interest so far...just no buyers that are on the west coast. Maybe I'll trailer it to Carlisle next year if I still have it...lol |
TTT still lots of interest over 10K looks, just can’t seem to make a deal work for both parties. May trade for a c2 early c3 (read that as w/chrome bumpers) cruise nite car I can drive now. Let me know what you’ve got if interested.
|
Hey Dave, I just read this entire thread BACK to FRONT. yep
PRETTY COOL! |
TTT for a great project car!
|
Well, made it look more like a car today. Installed the body back on the chassis and set the front end in place. Still need to finish removing the old front fiberglass to make it fit better. Was buy myself with a cherry picker for the body drop. A trick I’ve used before is to install some long all thread rods to help keep it inline. Yes still for sale just getting it closer for transport...or not...lol 😎😂😏.
https://cimg9.ibsrv.net/gimg/www.cor...121a1e7cf.jpeg Living dangerously by myself. https://cimg4.ibsrv.net/gimg/www.cor...dad6bf34a.jpeg https://cimg5.ibsrv.net/gimg/www.cor...bd463ddbc.jpeg Yeah, I turned the bushing over before I bolted it down...oop’s. It’s been a while. https://cimg7.ibsrv.net/gimg/www.cor...8c9c69c88.jpeg Bought this from a forum member. Very nice to adjust on the fly to keep everything inline. https://cimg8.ibsrv.net/gimg/www.cor...48d703fb4.jpeg Threaded rod sure helps and yes I turned this bushing over too. https://cimg0.ibsrv.net/gimg/www.cor...05e0cf8b5.jpeg https://cimg3.ibsrv.net/gimg/www.cor...4d2109f19.jpeg Almost looks like a Corvette... https://cimg6.ibsrv.net/gimg/www.cor...7e635cce8.jpeg Look, it’s almost in one piece...and I’m not bleeding...this time...lol https://cimg1.ibsrv.net/gimg/www.cor...bed4aec3c.jpeg |
PM sent
|
Chris, you keep working on it, soon it will be up and running. Best for your sale. IF I was younger, I would take this on. Have what you have, all the pain. It's life. Best for the project, either completing it or sale. Looks like a nice one. Question, BB, or small, I don't remember seeing it, Auto or 4 speed? Best for your health,pain and the 67.
|
Originally Posted by Thunder80
(Post 1601008993)
Chris, you keep working on it, soon it will be up and running. Best for your sale. IF I was younger, I would take this on. Have what you have, all the pain. It's life. Best for the project, either completing it or sale. Looks like a nice one. Question, BB, or small, I don't remember seeing it, Auto or 4 speed? Best for your health,pain and the 67.
|
Tim, I have been watching your progress on your car. I am interested in the car, but have a few questions. Could I contact you if you still have the car or you could call me at 859-333-3487.. Is the car and parts available to ship? Steve
|
VetteGuy402
Steve King 402-201-3515 Cash buyer |
Hi I Have. Some interest in your car. My name is Kim Walker phone # is 570 419 6318 please call me at your convenice. Serious buyer thanks
Is this car still available? I see that there has been no activity since last month.If it is a call or pm would be greatly appreciated thanks |
I’ve been asked for more pictures of the parts that go with the car. So here you go...
https://cimg5.ibsrv.net/gimg/www.cor...5cbcae67e.jpeg https://cimg8.ibsrv.net/gimg/www.cor...f4ab940ba.jpeg Fresh rebuilt clock https://cimg0.ibsrv.net/gimg/www.cor...c26dc4d8b.jpeg https://cimg3.ibsrv.net/gimg/www.cor...b8fa7be70.jpeg Fresh restored inside mirror https://cimg5.ibsrv.net/gimg/www.cor...0ba2e2236.jpeg https://cimg8.ibsrv.net/gimg/www.cor...e9554d82b.jpeg Big Block dash cluster https://cimg5.ibsrv.net/gimg/www.cor...29997bc3d.jpeg https://cimg8.ibsrv.net/gimg/www.cor...e9b7fcabc.jpeg https://cimg9.ibsrv.net/gimg/www.cor...14897dc2c.jpeg https://cimg3.ibsrv.net/gimg/www.cor...8b72423b8.jpeg Updated radio with late model wiring |
More pictures...
https://cimg6.ibsrv.net/gimg/www.cor...3b8a09b0a.jpeg Original BB hood https://cimg0.ibsrv.net/gimg/www.cor...1af9d5d62.jpeg https://cimg5.ibsrv.net/gimg/www.cor...e160cd82c.jpeg https://cimg9.ibsrv.net/gimg/www.cor...ad7ce61b3.jpeg GTS 1” wider than stock quarter panels https://cimg3.ibsrv.net/gimg/www.cor...18629467b.jpeg More seat pictures and in the flat box’s is a complete set of NOS factory tinted side and vent window glass. https://cimg1.ibsrv.net/gimg/www.cor...8f0223f34.jpeg Dash pad cores, seats https://cimg8.ibsrv.net/gimg/www.cor...857fff242.jpeg Battery tray kit https://cimg4.ibsrv.net/gimg/www.cor...f7dce3dfc.jpeg Seat belts https://cimg3.ibsrv.net/gimg/www.cor...9f66e1ff9.jpeg Glove box Assembly and I have the lock mechanism. |
All times are GMT -4. The time now is 09:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands