CorvetteForum - Chevrolet Corvette Forum Discussion - Has anyone ran into this on the car

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)

- C7 General Discussion (https://www.corvetteforum.com/forums/c7-general-discussion-142/)

- - Has anyone ran into this on the car (https://www.corvetteforum.com/forums/c7-general-discussion/4284713-has-anyone-ran-into-this-on-the-car.html)

robert miller

06-12-2019 09:06 PM

Has anyone ran into this on the car

I am doing a new forged build in my car well ran into a dam big problem on the after market parts on it now. In using the MSD ported intake with the plate you have to use with it ZR1 95 T.B. now hits the water pump on the car cant bolt it up, plus the T.B. plug that goes into it now hits the A/A blower also.

It is always a dam headache with this stuff. So I am hoping that MSD makes a intake on it that has a like 103 mouth on it.. Robert

Vetteman Jack

06-12-2019 10:23 PM

Good luck, Robert. Hope you can get this worked out and get your car up and running with the mods you want to do.

robert miller

06-12-2019 10:59 PM

Ttt

Quote:

Originally Posted by Vetteman Jack (Post 1599573437)

Good luck, Robert. Hope you can get this worked out and get your car up and running with the mods you want to do.

Thanks man I will one way are the other for now it is back to the stock intake & t.b. :ack:

All times are GMT -4. The time now is 02:51 AM.