C5 Exhaust @ Carlisle
Does anyone know if there will be vendors at Carlisle this coming Aug.installing exhaust system? There are usually 3-4 installers on the grounds.
Trying to find out what vendors will be there. Need a system installed. |
Go to the Carlisle website and look for a vendor directory. From there I'm sure you can find somebody who will be doing installs. I've heard some people say that there are fewer install booths because of some insurance reasons but I've not noticed it.
|
From website:Take your Corvette to the Next LevelInstallation Alley – Here at the EventIf you are thinking about a new exhaust system and mods for your Corvette, look no further than Installation Alley! The biggest names in the industry, including Borla, Corsa, MagnaFlow, Flowmaster, Billy Boat and Kooks will be on hand all weekend, with installations of exhausts and other bolt-on items available direct or with partners such as A&A Auto Parts. Why bother getting dirty; let the companies that create the exhaust systems and their partners install it directly on your Corvette, while you enjoy the show! Show Less https://www.carlisleevents.com/image...rsn=db4051f9_0 https://www.carlisleevents.com/image...rsn=9d876e2d_0 https://www.carlisleevents.com/image...rsn=e0785cb6_0 https://www.carlisleevents.com/image...rsn=d32d9f8f_0 https://www.carlisleevents.com/image...vrsn=6f8b432_0 https://www.carlisleevents.com/image...rsn=f6865144_0 https://www.carlisleevents.com/image...rsn=964a6db0_0 https://www.carlisleevents.com/image...rsn=265e76b3_0 |
Thanks for the info
|
Header install? No charge for the install??? or just catbacks?
|
Just a cat backs. American racing was there 3 or 4 years ago was doing full length.
|
Originally Posted by mfi2000
(Post 1599721861)
Header install? No charge for the install??? or just catbacks?
|
That would be great..if they don't do headers..a nice BB fusion catback would be great. Looks to be a bit of a PITA to install..the vacuum line at least.
|
Andy, I think you asked me what system I have yesterday when you were by...it's the Borla Stinger and I had mine done at Carisle...also if you want an X pipe or H pipe installed get it done there too !!...glad your car is fine now and that you can go faster than 159 MPH !!!
|
Originally Posted by C5 Diag
(Post 1599724909)
Andy, I think you asked me what system I have yesterday when you were by...it's the Borla Stinger and I had mine done at Carisle...also if you want an X pipe or H pipe installed get it done there too !!...glad your car is fine now and that you can go faster than 159 MPH !!!
thanks again |
Thanks to all for the helpful info
|
fwiw, the variety of installations have decrease over the years.Last year all I saw were exhausts.
|
I got both an axle back system and ax X pipe installed at Carlisle the past few years by A&A. They do a really good job and have a wide variety of exhausts to choose from. Free installation. No more headers though. EPA regulations have pretty much shut that down.
|
Too bad..the header install would be great..cat backs are pretty easy in comparison....
|
All times are GMT -4. The time now is 10:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands