CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C6 Corvettes for Sale (https://www.corvetteforum.com/forums/c6-corvettes-for-sale-98/)
-   -   FS: 2008 Base C6 With ZR1 Widebody 11XX HP (https://www.corvetteforum.com/forums/c6-corvettes-for-sale/4294850-2008-base-c6-with-zr1-widebody-11xx-hp.html)

Pmarine1 07-11-2019 08:41 PM

2008 Base C6 With ZR1 Widebody 11XX HP
 
Looking to sell 2008 base model C6 with 80k miles on the body and 1,500 on the build. Car made 11XXrwhp on E70 with no meth and is tuned by Pat G in Victoria, TX. (this was before upgrading to larger piping and with standard procharger intercooler.) See list below of modifications, feel free to PM me with any questions. Asking $50,000 obo.

BODY:
2008 Base C6
OEM ZR1 fenders, quarter panels, front bumper and carbon side skirts.
RPM Rollbars chromoly weld in 6 point rollbar with optional rear section.
LG 15" spindle conversion.
OEM black grandsport wheels and rear set of 15" Weld RTS wheels.

DRIVETRAIN:
431 LSX built by Thompson Motorsports
LSX block, Manley dry sump 4" crank, TMS H beam rods and Diamond pistons.
Mast 285 heads converted to parallel cooling and custom Cometic head gaskets.
242/254 .651/.631 115 LSA cam, stock rockers and TMS lifters.
Ls7 TB and intake.
Dewitts cut down radiator and custom Spal brushless fans.

A&A 10 rib Procharger bracket with new style tensioner.
Procharger F1X with DP 3.8 pulley (also have 4").
Kfab secondary drive.
Custom piping by Speedlab Creations in Houston, 3.5" aluminum to intercooler and 4" to TB.
Custom Bell 3.5" intercooler.
Dual Procharger race valves.
IW 10 rib 10% OD balancer.

Centerforce DYAD clutch and tick master cylinder.
DSS 3.5" aluminum couplerless prop shaft.
ZR1 TR6060 and ZR1 diff with DSS stub shafts.

Fore Triple 267 fuel pump setup, Aeromotive rails, flex sensor and ID 1700X injectors (less than 100 miles on injectors)
Alkycontrol methanol injection. (Has not been used, car was tuned without meth)

Kooks 2" headers with gutted xpipe and modded ZO6 mufflers.


https://cimg7.ibsrv.net/gimg/www.cor...7d1899080b.jpg
https://cimg8.ibsrv.net/gimg/www.cor...06cb94473f.jpg
https://cimg9.ibsrv.net/gimg/www.cor...f0aaf48340.jpg
https://cimg0.ibsrv.net/gimg/www.cor...fb369d2c89.jpg
https://cimg1.ibsrv.net/gimg/www.cor...fa4b881f23.jpg
https://cimg3.ibsrv.net/gimg/www.cor...8ee468c8f3.jpg
https://cimg4.ibsrv.net/gimg/www.cor...783a0a7346.jpg
https://cimg5.ibsrv.net/gimg/www.cor...bfea9cc48b.jpg
https://cimg6.ibsrv.net/gimg/www.cor...fb97cfe4ff.jpg
https://cimg8.ibsrv.net/gimg/www.cor...b0fbfadef8.jpg
https://cimg0.ibsrv.net/gimg/www.cor...9a1862d147.jpg

Pmarine1 07-12-2019 08:59 PM

https://cimg2.ibsrv.net/gimg/www.cor...980dffccbf.jpg
https://cimg5.ibsrv.net/gimg/www.cor...1759ca8981.jpg

CorvetteBrent 07-14-2019 03:35 AM

Incredible build, looks like a ton of fun. No doubt it's quicker than many cars twice it's price or more.

Pmarine1 08-09-2019 10:58 PM

Bump

CMPNS8N 08-13-2019 08:48 PM

So.
Much.
Want.


(free bump)


All times are GMT -4. The time now is 09:13 PM.


© 2024 MH Sub I, LLC dba Internet Brands