C7 Z06 picks up 211rwtq@3200rpm with just a re-tune
This C7 Z06 M7 came into our shop with an upper pulley, headers and meth. The customer's concern was poor drivability and no low end torque. After some time on the chassis dyno, Howard was able to correct the customer's concerns and make some impressive gains, restoring the power level to what would be expected for these modifications while not pushing it beyond a safe level.
+211rwtq @3200rpm +62rwtq at torque peak, moved peak down to 3700rpm and flattened the curve +46rwhp at horsepower peak and flattened/smoothed the curve https://cimg2.ibsrv.net/gimg/www.cor...6b3111d61.jpeg https://cimg2.ibsrv.net/gimg/www.cor...391e1ddbfa.jpg Don't forget to subscribe to our YouTube channel for new videos on vehicle and engine projects in the shop. https://www.youtube.com/user/rlmsvideos |
That's insane. How bad was the first tune? Or did it just not have one?
|
Originally Posted by ss2z06
(Post 1601140592)
That's insane. How bad was the first tune? Or did it just not have one?
Then proceeded to calibrate the car properly.. |
I wish tuners would know their limitations and subcontract out to someone that can educate them to help them and the customers at the same time.
That is a huge difference on low end take off torque. Nicely done! |
Wow! From that chart I would have guessed you guys replaced a centri blower...... Bet the owner loves it now!!!
|
I have a number of friends with modified cars, so when I was looking to modify my 2008 C6 Vette, I asked where to take it near me (Lake Worth/West Palm Beach area). Only two companies were recommended and Redline was one of them. I went to and got quotes from both. Redline stood out to me because of the time both Rich and Howard spent with me not only on the modification I wanted to do, but they took the time to show me around the shop and some of the projects they were working on. I got the quote a few days later, but wound up buying a 2019 C7 ZO6 instead so did not have the work done. When it's time to do my ZO6, Redline is where I'll be spending my money.
|
Originally Posted by tail_lights
(Post 1601145216)
Wow! From that chart I would have guessed you guys replaced a centri blower...... Bet the owner loves it now!!!
|
Originally Posted by RogerRamjet21
(Post 1601145254)
I have a number of friends with modified cars, so when I was looking to modify my 2008 C6 Vette, I asked where to take it near me (Lake Worth/West Palm Beach area). Only two companies were recommended and Redline was one of them. I went to and got quotes from both. Redline stood out to me because of the time both Rich and Howard spent with me not only on the modification I wanted to do, but they took the time to show me around the shop and some of the projects they were working on. I got the quote a few days later, but wound up buying a 2019 C7 ZO6 instead so did not have the work done. When it's time to do my ZO6, Redline is where I'll be spending my money.
|
All times are GMT -4. The time now is 09:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands