SBC Full Exhaust- Headers to Tailpipes
Off of a 79 Corvette with SBC and TH350 but should fit other years. Full exhaust system headers to tailpipes. Includes a set of Hooker Comp headers that I had ceramic coated at QC Coating after I welded the O2 bungs and 3/8 stainless flanges on. 409 stainless reducers/dumps/extensions I fabbed up. Dual exhaust hanger (TH350). Pypes Violator X-Pipe 409 stainless system. About 2 years old with less than 500 miles. Located south of Detroit but will ship at your expense. $550 obo
https://cimg1.ibsrv.net/gimg/www.cor...a61ffa656.jpeg https://cimg4.ibsrv.net/gimg/www.cor...b99dceb01.jpeg https://cimg1.ibsrv.net/gimg/www.cor...1a68e6c00.jpeg https://cimg8.ibsrv.net/gimg/www.cor...7c53b6bcf.jpeg https://cimg9.ibsrv.net/gimg/www.cor...6079eb44f.jpeg https://cimg2.ibsrv.net/gimg/www.cor...89ba86080.jpeg https://cimg7.ibsrv.net/gimg/www.cor...e019c3f14.jpeg https://cimg6.ibsrv.net/gimg/www.cor...3827a77e2.jpeg |
Would these pipes go around a Turbo 400?
|
I believe so. I just checked the pan dimension and the TH350 is about a half inch wider than the widest section of the 400 pan.
|
Originally Posted by mbb9674
(Post 1601269374)
I believe so. I just checked the pan dimension and the TH350 is about a half inch wider than the widest section of the 400 pan.
|
PM sent
|
Wow pretty much exactly what I’d like; if only you were about 1,000 miles closer....
Adam |
( pm sent also)
Let me know if this is still available. Id like this for my '71. Do you think it would work on mine with a 5 speed Tremec? Thanks |
I live and work near Detroit, so pickup would be easy. I really am only interested in the headers, and possibly the cut-out sections. I have a custom made 3" mandral exhaust, with the same headers; which are getting rusty. If you would consider those seperate, let me know. If you are interested I have a full set of 1979 corvette aluminum rims, that are fully polished. The rears have been professionally widened to 9" wide, by Weldcraft, in Livonia. This will allow a 275/ 15/60 tire to fit very, very well!
I realize that this is not the response you are looking for, so I apologize if it is bothersome. Stay healthy, from another MI. corvette forum member. Jim |
Hey Jim, sorry but the system actually sold last week. Hope you stay safe/healthy as well.
SYSTEM SOLD |
All times are GMT -4. The time now is 03:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands