Best way to run a battery cut-off switch?
You guys that have done this...what's the best way to do it? There isn't a ton of room in that battery tray, but that is probably the easiest place to access a cut-off switch.
Should I just get one from Summit, or what would you recommend. Since this car is brand new to me, and I don't trust some of the old wiring, I just disconnected the + cable for now. I have a small tool kit I slipped back there and so this is not a big deal to do. It will also prevent a current draw...should I have one and not know it. Thanks. |
Re: Best way to run a battery cut-off switch? (WA 2 FST)
Wes - There was a post on this in the last week and many others in the archives. Do a search since members have done it different ways so you can choose which one suits you. :seeya
|
Re: Best way to run a battery cut-off switch? (WA 2 FST)
put it on the - post and install a inline fuse with a 10 amp fuse accross the switch so the clock and radio will not lose their power while the switch is open. :chevy
|
Re: Best way to run a battery cut-off switch? (WA 2 FST)
This may be what you are looking for. From J.C. Whitney.
https://temp.corvetteforum.net/c3/pa...onnect_003.jpg https://temp.corvetteforum.net/c3/pa...onnect_006.jpg [Modified by paul79, 8:28 PM 11/23/2002] |
Re: Best way to run a battery cut-off switch? (paul79)
Thank you, gentlemen. :)
|
Re: Best way to run a battery cut-off switch? (WA 2 FST)
Save yourself some bucks and use a stud of the right size and length along with an appropriate Wing Nut. Piece Of Cake to hookup and unhook. Not fancy, but you will save yourself some money.......... :yesnod: :yesnod: :yesnod:
|
Re: Best way to run a battery cut-off switch? (paul79)
I have the "knife switch" just like Paul. Bought from JC Whitney. I like it a LOT better than the green wheel on my 69. The only minor problem??? When it's disconnected, and the switch blade is "UP", I have to leave the battery lid door open. NO big problem. My 69 side post battery has the terminals facing forward. Chuck
|
Re: Best way to run a battery cut-off switch? (WA 2 FST)
The WirthCo switch from J.C. Whitney is the way to go! Mine is installed on an Optima Red Top exactly like Paul's. Works great.
|
Re: Best way to run a battery cut-off switch? (WA 2 FST)
I agree with Paul 79...I have the unscrew type...which takes too long...especially if you really need it NOW...
|
Re: Best way to run a battery cut-off switch? (WA 2 FST)
Just a final comment. I used that switch all last summer with no problem at all. I lubed with di-electric grease and there is not a hint of corrosion. It was money very well spent.
|
All times are GMT -4. The time now is 06:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands