Driver head coolant temp sensor wires
Can someone tell me which color wire goes where on the coolant sensor pigtail? i took a reference photo for EVERYTHING I depinned except for this one apparently. :(
|
|
Ok, my coolant sensor plug broke, the replacement plug that I have to splice on doesn’t have tan and yellow, it has one black wire and one white wire. So do I connect the white wire to the tan low resistance wire and the black to the yellow temp sensor signal wire or vice versa?
|
Hard to tell unless we know which side each color is on.Just look at the post above and match up the wires.
|
Post #4 in this thread talks to the colors and position on the connector. You should be able to figure it out from there I think https://www.corvetteforum.com/forums...n-2005-c6.html
|
Thanks for the info, I replaced the plug and sensor today, so far so good, we will see if it comes back again. Thanks!
|
All times are GMT -4. The time now is 06:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands