CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C1 & C2 Parts (https://www.corvetteforum.com/forums/c1-and-c2-parts-59/)
-   -   FS: Original T 3 Guide headlamps for that perfect car or survivor (https://www.corvetteforum.com/forums/c1-and-c2-parts/4778708-original-t-3-guide-headlamps-for-that-perfect-car-or-survivor.html)

T VETTE 10-26-2023 05:06 PM

Original T 3 Guide headlamps for that perfect car or survivor
 
I just uncovered a supply of these T 3 headlamps! I have many available for that final touch to a perfect restoration or survivor. The lamps have been in storage since about 1987 and not on the road. These are used and all will be tested to ensure they work, they are NOT aftermarket. I have the small 4 lamp style and also the large 2 lamp style. The small are $25 each and the large are $30 each. Shipping is a flat $15 so the more you buy the better the deal on shipping for you. I will carefully wrap up for a safe trip. Guaranteed to work.

I will take a check or PayPal. Send me a PM of what you need. I don't visit here every day, a few times a week. Will post a couple pictures shortly. If you have a question on these T3 feel free to post it here. Thank you

T VETTE 10-26-2023 06:55 PM

https://cimg4.ibsrv.net/gimg/www.cor...dd9b4f600d.jpg
https://cimg9.ibsrv.net/gimg/www.cor...9631ac0c18.jpg
https://cimg2.ibsrv.net/gimg/www.cor...647b852965.jpg

T VETTE 10-26-2023 06:57 PM

Some of the large have a date code, photo shows like a double stamp reflection, but not on actual lamp.

deejaydu 10-26-2023 09:28 PM

Do you have 4 of the correct style for a 67? They are different for other 63 to 66 I think.

Jay

T VETTE 10-27-2023 01:08 AM

Likely, I will have to research that but do you know exactly what the look is on the face for 67?

deejaydu 10-27-2023 09:46 AM


Originally Posted by T VETTE (Post 1607180729)
Likely, I will have to research that but do you know exactly what the look is on the face for 67?

No I am not sure but I was hoping that you did. I know the faces were different for each of the 63 to 67 years. I checked my reference material that I have and there are no specific details.

Thanks
Jay

T VETTE 10-27-2023 11:15 AM

I just cleaned out my PM, sorry if I did not receive your message. Bob try again. I am working my way through the PM mail on all requests this morning.

T VETTE 10-27-2023 12:34 PM

Jay, 1960 to 1967 are the same lamps. The word Guide is down at the bottom of the lamp, earlier Guide was above the T 3. Then in 1968 the lamp had little vertical lines next to the T 3.

bob68 10-27-2023 12:56 PM

I sent you a PM
Bob

Doo142 10-27-2023 01:04 PM

T3
 
https://cimg4.ibsrv.net/gimg/www.cor...f114b86aa.jpeg
T3 - Hope this helps

Fat Mike 10-27-2023 01:50 PM

T - did you receive a message from me???

T VETTE 10-27-2023 02:12 PM

Yes Mike I did. I only have about 6 of those large style and five have the pebble look on the T but one is a weak texture and one has the lower lamp aiming bung broken off. I think I can do 4 in good shape but these are used and not perfect out of the box, but at least an 8 or 9 out of 10 grade. If you want the best 4 let me know. What year is this for?

T VETTE 10-27-2023 03:23 PM

I got more of a response than I expected and I think I have returned a message to all, and still working on them as they come in. Thanks for you patience. It really helps if you tell me the year of the car so we get as correct as possible. Low beam is 3 prong and high is 2 prong, just an fyi.

Remember these are used and not new out of the box, but very nice. Thanks

deejaydu 10-27-2023 03:55 PM

PM just sent to you.

Jay

mblake101 10-27-2023 05:46 PM

PM sent……

Injected Stingray 10-27-2023 08:19 PM

Looking for high/low beam: three prong like SB6871S in the link. I need two. Small t3 with the vertical bars.

T VETTE 10-27-2023 10:08 PM

Injected, I have plenty of those 3 prong 1968-1971 type with verticil bars I will send you PM.

Attention everybody else I am out of the perfect condition low beam 3 prong for 1960-1967 cars

T VETTE 10-28-2023 06:01 PM

I still have plenty of high beam 2 prong for 1960-67 and a couple 7" but with one missing aiming bung broken off the front.

Dan J 10-30-2023 10:35 AM


Originally Posted by T VETTE (Post 1607186133)
I still have plenty of high beam 2 prong for 1960-67 and a couple 7" but with one missing aiming bung broken off the front.

PM sent

56vetjim 11-02-2023 09:32 PM

Have sent you a PM , no response yet . Looking for large style T3 lamp for 56 Corvette. Must be lettered with "SEALED BEAM" as pictured.
Sealed beam is quite large. Do you have any ? "GUIDE"


All times are GMT -4. The time now is 09:20 AM.


© 2024 MH Sub I, LLC dba Internet Brands