CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C8 ERay/Hybrid/EV Discussion (https://www.corvetteforum.com/forums/c8-eray-hybrid-ev-discussion-188/)
-   -   E Ray production (https://www.corvetteforum.com/forums/c8-eray-hybrid-ev-discussion/4817147-e-ray-production.html)

jim copland 03-23-2024 01:44 PM

E Ray production
 
I saw several posts that stated the roll out would be slow but this is a bit slower than I expected. Does anyone know why. I suspect it must be either a supply issue or some components are failing a QC test. I know that many are very anxious for that call from their dealer getting that allocation but for me I am hoping it is a few months out and I will enjoy my Stingray until that time.

GOLD72 03-23-2024 05:29 PM


Originally Posted by jim copland (Post 1607648960)
I saw several posts that stated the roll out would be slow but this is a bit slower than I expected. Does anyone know why. I suspect it must be either a supply issue or some components are failing a QC test. I know that many are very anxious for that call from their dealer getting that allocation but for me I am hoping it is a few months out and I will enjoy my Stingray until that time.

:iagree: Disappointing slow. Due to the front motor and battery pack install, we might get pleasantly surprised to hear one day that BGA produced a long string of ERs together because it was logistically convenient to do it that way instead of having ones and twos intermingled on the line with SRs and Zs. JMHO

6850mike 03-24-2024 12:44 PM

If they are running 2 shifts why could they not just run say Erays or Z's on an entire shift?

rackemup 03-24-2024 01:26 PM


Originally Posted by 6850mike (Post 1607651541)
If they are running 2 shifts why could they not just run say Erays or Z's on an entire shift?

This would make sense.

plake 03-24-2024 01:47 PM

Nope they just keep pounding out SR’s and they’re stacking up in lots, killing resale value of the used ones. 😡

/Bear/ 03-24-2024 02:23 PM


Originally Posted by 6850mike (Post 1607651541)
If they are running 2 shifts why could they not just run say Erays or Z's on an entire shift?

That's not how it works. GM has a complicated algorithm to determine the order Corvettes go down the production line, and they don't build too many similar cars in a row.


Shinobi'sZ 03-24-2024 03:41 PM


Originally Posted by /Bear/ (Post 1607651869)
That's not how it works. GM has a complicated algorithm to determine the order Corvettes go down the production line, and they don't build too many similar cars in a row.

Yeah my number at MacMulkin hasn't moved this past week very much. I should be below 300 by now, been sitting just above 300 for two weeks.

Q Pilot 03-24-2024 06:22 PM


Originally Posted by Shinobi'sZ (Post 1607652058)
Yeah my number at MacMulkin hasn't moved this past week very much. I should be below 300 by now, been sitting just above 300 for two weeks.

I don’t think MacMulkin got any E-Ray allocations Feb or Mar. Your movement and mine lately have been to dropouts only. According to the other forum only 197 have been produce so far. Even if MM gets a large E-Ray allocation in April, those won’t be produced until Jun time frame. When does the corvette BG plant normally switch to the next model year Jun/Jul??? Originally I was at #154 and would be lucky enough to get a ‘24. Now at #126 it’s looking like it’ll be a ‘25. Chinese water torture.

mzwern 03-24-2024 09:25 PM

I have been on the waiting list for about a year and a half, and am just trying to ignore the wait. Unfortunately in my case I'm
expecting a long time to go still!

Shinobi'sZ 03-24-2024 09:44 PM


Originally Posted by Q Pilot (Post 1607652441)
I don’t think MacMulkin got any E-Ray allocations Feb or Mar. Your movement and mine lately have been to dropouts only. According to the other forum only 197 have been produce so far. Even if MM gets a large E-Ray allocation in April, those won’t be produced until Jun time frame. When does the corvette BG plant normally switch to the next model year Jun/Jul??? Originally I was at #154 and would be lucky enough to get a ‘24. Now at #126 it’s looking like it’ll be a ‘25. Chinese water torture.

Nice part about if we do get pushed to 2025 is that hopefully some of the new bugs or updates get worked out as a result of the 2024 rollout. Either way it's all good. Thanks for the info on the allocations.

Lefty32 03-24-2024 11:44 PM


Originally Posted by Q Pilot (Post 1607652441)
I don’t think MacMulkin got any E-Ray allocations Feb or Mar. Your movement and mine lately have been to dropouts only. According to the other forum only 197 have been produce so far. Even if MM gets a large E-Ray allocation in April, those won’t be produced until Jun time frame. When does the corvette BG plant normally switch to the next model year Jun/Jul??? Originally I was at #154 and would be lucky enough to get a ‘24. Now at #126 it’s looking like it’ll be a ‘25. Chinese water torture.

I know! If you wave your hand, I think I can just see you ahead of me in the MM line. :-) I'm 131 now.

3LZR21U 03-24-2024 11:48 PM

I'm about to the point where I'm just going to say F-it and wait for a Zora.

Bob MacLean 03-25-2024 07:35 AM


Originally Posted by Q Pilot (Post 1607652441)
I don’t think MacMulkin got any E-Ray allocations Feb or Mar. Your movement and mine lately have been to dropouts only. According to the other forum only 197 have been produce so far. Even if MM gets a large E-Ray allocation in April, those won’t be produced until Jun time frame. When does the corvette BG plant normally switch to the next model year Jun/Jul??? Originally I was at #154 and would be lucky enough to get a ‘24. Now at #126 it’s looking like it’ll be a ‘25. Chinese water torture.

MM got 7 allocations in Feb... that was last round., EV station on line too slow/complex is the WAG

Bob MacLean 03-25-2024 07:38 AM


Originally Posted by Shinobi'sZ (Post 1607652058)
Yeah my number at MacMulkin hasn't moved this past week very much. I should be below 300 by now, been sitting just above 300 for two weeks.

MM got 7 in Oct, 6 in Nov and then 7 in Feb.. otherwise dropouts are only changes to #

BPHORSEGUY 03-25-2024 09:02 AM

BG does not build 2 Zs or Es or I believe HTCs back to back for logistical reasons.Right hand drive are built in batches.
This has been well documated for a while now !

Bob MacLean 03-25-2024 09:54 AM


Originally Posted by BPHORSEGUY (Post 1607653715)
BG does not build 2 Zs or Es or I believe HTCs back to back for logistical reasons.Right hand drive are built in batches.
This has been well documated for a while now !

ERAYs are 0-7 a day and Z06 are 50-60/ day... so they can't E Station parts install takes too long and throttled as not to slow the line down is mt WAG

Q Pilot 03-25-2024 09:57 AM


Originally Posted by Bob MacLean (Post 1607653501)
MM got 7 allocations in Feb... that was last round., EV station on line too slow/complex is the WAG

Thanks Bob for the correction. I remember now your post on MM getting 7 allocations in Feb. Hopefully you should be getting your E-Ray in April.

Bob MacLean 03-25-2024 11:50 AM


Originally Posted by Q Pilot (Post 1607653890)
Thanks Bob for the correction. I remember now your post on MM getting 7 allocations in Feb. Hopefully you should be getting your E-Ray in April.

Check...Nope... at 3000 like a number and hope by summer..? I heard one at 3000 in Dec had end of May for TPW.

gmarcucio 03-25-2024 12:37 PM

What month is the norm for switching model years?

3LZR21U 03-25-2024 03:27 PM


Originally Posted by gmarcucio (Post 1607654633)
What month is the norm for switching model years?

What I have seen is that it aligns closely with fiscal years. So I would expect October changeover--at the earliest.


All times are GMT -4. The time now is 11:08 PM.


© 2024 MH Sub I, LLC dba Internet Brands