Need clear photo
 

Good morning guys, I need a bit of help, what I am looking for is a clear focused picture of a ballast resistor in its correct orientation with the original wires in their correct position & likewise for the distributor coil before the covers are installed, this would be for a 65 327/350 horse car. I am replacing a butchered harness with a new factory correct harness from Lectric Limited. So, even though I have a schematic from two different vendors, I'm still getting cross eyed trying to figure it all out, I appreciate any help offered, also is anyone rebuilding antennas and or tele columns these days. Thanks.
Don

Best I can do! My Sold 65!
https://cimg5.ibsrv.net/gimg/www.cor...79bc0c17f8.jpg

Thanks, good pic, but I need to see which color wires go to the ballast & which color wires go to the coil, I can make out the top of the resister but none of the others, your picture does help some.

Pink

Mine are faded red / pink both in (Top of resistor) and out (Bottom)

https://cimg2.ibsrv.net/gimg/www.cor...60bd958f33.jpg

Thanks, good photo, I appreciate it

If there's a thing 65GGvert doesn't know about these electricals, you don't need to know it