CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C4 Tech/Performance (https://www.corvetteforum.com/forums/c4-tech-performance-48/)
-   -   Where can I get a 3" mandrel bent custom exhaust in Dallas, any ideas?? (https://www.corvetteforum.com/forums/c4-tech-performance/706705-where-can-i-get-a-3-mandrel-bent-custom-exhaust-in-dallas-any-ideas.html)

wheeljo2 12-08-2003 11:50 PM

Where can I get a 3" mandrel bent custom exhaust in Dallas, any ideas??
 


CentralCoaster 12-09-2003 03:58 AM

Re: Where can I get a 3" mandrel bent custom exhaust in Dallas, any ideas?? (wheeljo2)
 
You can buy the mandrel bends from Summit and take it to any shop. Not many places have mandrel benders, most just buy prebent stuff.

Check out Timspeed's exhaust setup.

TIMSPEED 12-09-2003 04:44 AM

Re: Where can I get a 3" mandrel bent custom exhaust in Dallas, any ideas?? (CentralCoaster)
 
Quote:

You can buy the mandrel bends from Summit and take it to any shop. Not many places have mandrel benders, most just buy prebent stuff. Check out Timspeed's exhaust setup.
:thumbs:
That's exactly what I did, bought the stuff from Summit and had a local shop build it to my spec. WITH parts and labor, my header-back exhaust was $300 and I GURANTEE it performs as well (if not better) than those high dollar units (Read: Borla, Corsa, B&B)

4DRSS 12-10-2003 12:28 PM

Re: Where can I get a 3" mandrel bent custom exhaust in Dallas, any ideas?? (wheeljo2)
 
The two best exhaust shops in DFW are either Lane's or Nick's. Both shops do great work and use mandrel bends. They are not cheap though, you get what you pay for.
http://www.lanesperformance.com/
http://nicksmufflers.torquecentral.com/

4DRSS 12-10-2003 07:11 PM

Re: Where can I get a 3" mandrel bent custom exhaust in Dallas, any ideas?? (4DRSS)
 
Here is the direct link for some of the exhausts Lane has done http://www.lanesperformance.com/custom_duals.html


All times are GMT -4. The time now is 12:03 AM.