Frame diagram 1978
1978 Doing a frame off restoration windshield frame doorpost rockers .I am doing a lot of work to this car. I would like to check the frame before I put it back together, dose some one have a good frame diagram they can copy and send to me. So I can make sure the frame is good before I restore it.
[Modified by lotus02, 5:49 PM 3/10/2004] |
Re: Frame diagram 1978 (lotus02)
I have the 79 AIM which has some good diagrams of the birdcage and frame, would that suffice. If so, email me the pertinants.
|
Re: Frame diagram 1978 (stinky)
if you get the GM service manual all the diagrams are in there.
Steve :steering: |
Re: Frame diagram 1978 (lotus02)
There is one in corvettefaq.com
|
Re: Frame diagram 1978 (stinky)
I want to make a jig to hold the frame when I cut it to put side rails in. I need the ones with diagrams with the body mounts height and spacing so I can square up the frame.
You can email it to trow@xcelco.on.ca or mail it to. Tim Trowbridge PO.BOX 988 Wyoming Ont Canada NON-1TO |
Re: Frame diagram 1978 (stpman)
I have the manual the diagrams I need are not in it, if you know the page numbers I will look again.
|
All times are GMT -4. The time now is 09:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands