CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)

- C3 Tech/Performance (https://www.corvetteforum.com/forums/c3-tech-performance-3/)

- - Bumper Bolts (https://www.corvetteforum.com/forums/c3-tech-performance/807021-bumper-bolts.html)

Simul8

04-26-2004 11:38 AM

Bumper Bolts

I see the catalog companies sell bumper bolt kits. I'm going to replace mine with stainless.
Does anyone know the size and qty of these kits? For the front and back.
Mine were held on with all kinds of different bolts and stasks of washers.

[Modified by Simul8, 11:38 AM 4/26/2004]

[Modified by Simul8, 11:39 AM 4/26/2004]

A72COUPEDT

04-26-2004 03:23 PM

Re: Bumper Bolts (Simul8)

SAME GUY MUSTA DONE MY BUMPERS TOO!! :rolleyes: I JUST WENT TO NEARBY HOME DEPOT AND BOUGHT A SET OF STAINLESS FOR MINE. BRING YOUR OLD ONES WITH YOU AND JUST FIGURE YOUR LENGTH BY HOW MANY WASHERS YOU ARE NOT GOING TO USE...EASY FIX :D

Cali,68,L-79

04-26-2004 03:37 PM

Re: Bumper Bolts (A72COUPEDT)

I just got back from Home Depot and got all the lock washers and bolts. I'm using my dremel to cut them to required length. NOT 12 washers stacked together to make up for a 7' bolt there A72COUPEDT :lol: Just slide a nut over the stud then back the nut over it to clean the threads unless you already have a TAP ands DIE set.

All times are GMT -4. The time now is 09:03 AM.