CorvetteForum - Chevrolet Corvette Forum Discussion - Search Results

 
Search: Posts Made By: Powershift
Showing results 1 to 25 of 499
Search took 1.53 seconds.
Yesterday, 02:22 PM
Replies: 11
Views: 505
Posted By Powershift

Mike: Then what model year gets the "635"...

Mike:

Then what model year gets the "635" switch?? I got this number from a JohnZ post in the archives a few days back. Source on Ebay also says 635 is for 65............but I guess the change...
Yesterday, 12:40 PM
Replies: 10
Views: 314
Posted By Powershift

PM or call Dom and ask him. Dom does this work...

PM or call Dom and ask him. Dom does this work to help us Corvette guys. He is not doing it to get rich. :D

Larry
Yesterday, 12:38 PM
Replies: 46
Views: 3,161
Posted By Powershift

And that is entirely possible. But a few of us...

And that is entirely possible. But a few of us believe OP primary problem at this point is in the 12 volt wire from the starter solenoid to the horn relay. After this is corrected, we can address...
Yesterday, 12:31 PM
Replies: 10
Views: 314
Posted By Powershift

There is only one source for a correct A6...

There is only one source for a correct A6 rebuilt. Dom is the man.

Larry
Yesterday, 12:30 PM
Replies: 10
Views: 314
Posted By Powershift

Leif: What dates do you need?? I just found...

Leif: What dates do you need??

I just found one on the internet that is almost a perfect date match for my late March 67 built car. End plate dates are only off by a week or two........maybe...
Yesterday, 10:31 AM
Replies: 3
Views: 300
Posted By Powershift

As NWMan states, the short answer is YES. Using...

As NWMan states, the short answer is YES. Using the 2x6 or other padding helps a lot to avoid dents.

I use two floor jacks, one on each side of the frame rails and avoid this area altogether.
...
Yesterday, 09:08 AM
Replies: 46
Views: 3,161
Posted By Powershift

Agreed......... Larry

Agreed.........

Larry
Yesterday, 09:07 AM
Replies: 11
Views: 505
Posted By Powershift

According to data I have seen, the "660" switch...

According to data I have seen, the "660" switch is for 1966 model (perhaps also very late 1965 models). The one supposedly for 1965 is "635" which is even more difficult to find. Perhaps switch has...
Yesterday, 08:59 AM
Replies: 34
Views: 1,310
Posted By Powershift

:iagree: I agree that is very likely the reason....

:iagree: I agree that is very likely the reason. Or it could have been that some DOT 5 fluid was made overseas and contaminated which created the problem. We may never know at this point.

This...
06-24-2019, 02:37 PM
Replies: 32
Views: 1,941
Posted By Powershift

Ed: Eyeball the pulleys and belts. If all...

Ed:

Eyeball the pulleys and belts. If all looks straight you are fine. If you see a "dogleg" then you know what to do. :D

Larry
06-24-2019, 12:47 PM
Replies: 34
Views: 1,310
Posted By Powershift

Gusto: Minor point, but most brake fluid...

Gusto:

Minor point, but most brake fluid reservoir I know have a rubber diaphragm seal on the top under/built into the cap. They are not directly open to air. Brake fluid expansion and...
06-24-2019, 11:19 AM
Replies: 46
Views: 3,161
Posted By Powershift

Very early on I told him to pull a fuse or two...

Very early on I told him to pull a fuse or two and see if he was getting 12 volts on the fuse block. This would check his bulkhead incoming power connection. This may be why he is doing this??
...
06-24-2019, 11:00 AM
Replies: 34
Views: 1,310
Posted By Powershift

:iagree: Best DOT 3, if I remember correctly,...

:iagree: Best DOT 3, if I remember correctly, was sold by Ford. Used in a lot of performance applications, and had a very high dry boil point. Unsure of part number right now, but could probably...
06-24-2019, 10:49 AM
Replies: 130
Views: 5,737
Posted By Powershift

The clips for the insulation can be easily...

The clips for the insulation can be easily purchased from Paragon or Long Island, etc. They go in with aluminum rivets. DR REBUILD has excellent aluminum rivets. Use a rivet gun with low air pressure...
06-23-2019, 07:26 PM
Replies: 32
Views: 1,941
Posted By Powershift

Yes, John, you gave us this information a few...

Yes, John, you gave us this information a few years back. I still have a paper copy in my files to refer to.

Thank you for all the great info you provide and help us with. :thumbs: :thumbs: ...
06-23-2019, 04:52 PM
Replies: 10
Views: 420
Posted By Powershift

I agree. :iagree: Years ago I had my...

I agree. :iagree:

Years ago I had my small block starter rebuilt with additional field coils like the BB cars. It now turns the engine over hot or cold and almost sounds like a jet turbine...
06-22-2019, 08:04 PM
Replies: 130
Views: 5,737
Posted By Powershift

Sage advice. :thumbs: Larry

Sage advice. :thumbs:

Larry
06-22-2019, 08:00 PM
Replies: 32
Views: 1,941
Posted By Powershift

That is what I was thinking as...

That is what I was thinking as well..............but just decided to let it rest. :cheers:

Larry
06-22-2019, 03:38 PM
Replies: 16
Views: 972
Posted By Powershift

Greg: Not certain I can help you solve this...

Greg:

Not certain I can help you solve this problem this afternoon, but I have a few comments:

1. If you cannot make the rear toe adjustment by adding and subtracting shims, you may have a bent...
06-22-2019, 09:51 AM
Replies: 130
Views: 5,737
Posted By Powershift

You can purchase a better TO bearing separately...

You can purchase a better TO bearing separately if you want: Federal-Mogul/BCA/GM part. Part numbers available in archives or if you ask.

I would put the Sachs PP thru the checks outlined by Lars...
06-21-2019, 03:53 PM
Replies: 8
Views: 617
Posted By Powershift

Master cylinder internal issue or a collapsed...

Master cylinder internal issue or a collapsed brake hose.

Try to identify which wheel or wheels are affected. That may identify exactly the problem. Is brake system power brakes with the dual...
06-21-2019, 03:50 PM
Replies: 7
Views: 485
Posted By Powershift

:iagree: That is how you do it if you encounter...

:iagree: That is how you do it if you encounter problems. :thumbs:

Larry
06-21-2019, 01:56 PM
Replies: 9
Views: 1,233
Posted By Powershift

Done at the dealership during delivery or in the...

Done at the dealership during delivery or in the new owner's back yard. :rofl:

Larry
06-21-2019, 01:52 PM
06-21-2019, 12:14 PM
Replies: 32
Views: 1,941
Posted By Powershift

I wold look very close at the power steering. My...

I wold look very close at the power steering. My educated guess is that it was added. There are clues. Check part numbers and any dates codes.

A few folks I know have added factory AC, but...
Showing results 1 to 25 of 499
 


 
Forum Jump

Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.