Callaway Honker Intake NOW AVAILABLE
Thread Starter
Melting Slicks
Joined: Nov 2006
Posts: 2,463
Likes: 2
From: Santa Barbara, CA
Callaway Honker Intake NOW AVAILABLE
Bowmanized is proud to offer the Callway Intake
Callaway Air Intake
Increases airflow by 34 percent. Adds 12 bhp in stock LS2's.
The Honker C6 provides reduced airpath restriction, accesses cooler air from outside of the engine compartment, and locates the air entry at a higher-than-ambient pressure area (relative to vehicle speed) to generate increased horsepower.
• Smooth internal surface and CAD-designed contours engineered to maximize laminar flow.
• Rigid filter element base ingests cooler, denser inlet air from outside of engine compartment.
• Easy-to-install duct attaches to OEM mounting locations at top of radiator support.
• OEM-grade polymer remains unaffected by severe under-hood temperature excursions.
• Low-restriction K&N filter element is washable and reusable for reliable service.
• Supports additional engine and vehicle modifications.
• Works with all OEM engine management sensors.
• Premium quality hardware used throughout for extended durability.
Dyno testing verified the airflow test results, indicating an increase of 12 bhp on an otherwise stock LS2! At the dragstrip, simply bolting a Honker into a stock 2005 coupe dropped its 1/4-mile ET by three full tenths and increased top speed by 2 mph!
The Honker C6 System includes CAD-designed air inlet duct, low restriction, washable and reusable K&N air filter element, rigid filter element housing, comprehensive installation instructions, and all required hardware for easy installation.
A fellow Corvette owner installed a honker on his already stout LS2 and picked up 15rwhp at the wheel. Keep in mind this car had EVERYTHING modded already before the CAI.
Please let me know if you're interested.
Callaway Air Intake
Increases airflow by 34 percent. Adds 12 bhp in stock LS2's.
The Honker C6 provides reduced airpath restriction, accesses cooler air from outside of the engine compartment, and locates the air entry at a higher-than-ambient pressure area (relative to vehicle speed) to generate increased horsepower.
• Smooth internal surface and CAD-designed contours engineered to maximize laminar flow.
• Rigid filter element base ingests cooler, denser inlet air from outside of engine compartment.
• Easy-to-install duct attaches to OEM mounting locations at top of radiator support.
• OEM-grade polymer remains unaffected by severe under-hood temperature excursions.
• Low-restriction K&N filter element is washable and reusable for reliable service.
• Supports additional engine and vehicle modifications.
• Works with all OEM engine management sensors.
• Premium quality hardware used throughout for extended durability.
Dyno testing verified the airflow test results, indicating an increase of 12 bhp on an otherwise stock LS2! At the dragstrip, simply bolting a Honker into a stock 2005 coupe dropped its 1/4-mile ET by three full tenths and increased top speed by 2 mph!
The Honker C6 System includes CAD-designed air inlet duct, low restriction, washable and reusable K&N air filter element, rigid filter element housing, comprehensive installation instructions, and all required hardware for easy installation.
A fellow Corvette owner installed a honker on his already stout LS2 and picked up 15rwhp at the wheel. Keep in mind this car had EVERYTHING modded already before the CAI.
Please let me know if you're interested.
Last edited by bowmanized; Mar 13, 2008 at 06:20 PM.
