ecklers coupe windjammer
Thread Starter
Pro
Joined: Jul 2006
Posts: 647
Likes: 17
ecklers coupe windjammer
Anyone out there have any experience with this product?
CORVETTE WINDJAMMER, BRONZE, COUPE, 2005-2012
OK, Can't post a copy of the picture on here. But it's ecklerscorvette.com part number 56139, and it's a piece of clear smoked plastic that goes on the top of the coupe's windshield to allegedly block 75% of the top-off wind noise.
Any feedback would be appreciated.
Thanks
Mike
CORVETTE WINDJAMMER, BRONZE, COUPE, 2005-2012
OK, Can't post a copy of the picture on here. But it's ecklerscorvette.com part number 56139, and it's a piece of clear smoked plastic that goes on the top of the coupe's windshield to allegedly block 75% of the top-off wind noise.
Any feedback would be appreciated.
Thanks
Mike
Race Director
Joined: Sep 2009
Posts: 11,338
Likes: 2,437
From: Eastern
I often wondered if Ecklers would make one of those for the C6. They had one for the C5 coupe.
The C5 section may be a good place to ask the question, as I'm sure lot's of them were used on the coupes if they decided to make one for the C6.
Anything that will keep the wind buffeting down in the coupe would be a plus
Keep us posted on what you find
I found a pic for those that want to see what it looks like
[IMG]
[/IMG]
The C5 section may be a good place to ask the question, as I'm sure lot's of them were used on the coupes if they decided to make one for the C6.
Anything that will keep the wind buffeting down in the coupe would be a plus
Keep us posted on what you find
I found a pic for those that want to see what it looks like
[IMG]
[/IMG]
Last edited by 4SUMERZ; Feb 13, 2013 at 12:52 AM.
Thread Starter
Pro
Joined: Jul 2006
Posts: 647
Likes: 17
Racer
Joined: Mar 2012
Posts: 362
Likes: 1
From: Indiana
Anyone out there have any experience with this product?
CORVETTE WINDJAMMER, BRONZE, COUPE, 2005-2012
OK, Can't post a copy of the picture on here. But it's ecklerscorvette.com part number 56139, and it's a piece of clear smoked plastic that goes on the top of the coupe's windshield to allegedly block 75% of the top-off wind noise.
Any feedback would be appreciated.
Thanks
Mike
CORVETTE WINDJAMMER, BRONZE, COUPE, 2005-2012
OK, Can't post a copy of the picture on here. But it's ecklerscorvette.com part number 56139, and it's a piece of clear smoked plastic that goes on the top of the coupe's windshield to allegedly block 75% of the top-off wind noise.
Any feedback would be appreciated.
Thanks
Mike
It does help. I'm not overly crazy about the way it connects, but it does hold. I keep a T-handle Allen wrench in car. I'm going to modify mine to fit into the same holes as the targa top, but haven't got around to it.
Racer
Joined: Mar 2012
Posts: 362
Likes: 1
From: Indiana
Pro
Joined: Jul 2007
Posts: 501
Likes: 4
From: Deep in the Heart of Texas
Yes. It helped. I used the hatch vent also. They work, but the hatch vent turned out to be a POS also. One day, in use, it just popped in half while I was driving. My wife asked, "Why is the back window open?"
