When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking to find a couple of bits for the headlight on a 2002. The first is the torx head bolt and nut with plastic bushing that is the pivot of the headlight. The second is the pin, push-on sheet metal retainer, and plastic bushing on the lifting linkage. Here are a few pics of the parts needed.
Looks like i need a pair of headlight hinge pin bolts w nylon bushings as well.... lost one no excuse,,, the other one was expelled from my hand when lightning struck while i was under the hood removing it..... tried a bolt and washers w nuts jambnuts etc. i cant bring myself to leave it that way
The large one with retainer can easily be replaced by a regular bolt and locking nut. Take your parts to a real hardware store and I bet they can hook you up with substitutes.
I used a regular bolt and locking nut on mine along with some washers to reduce the slop in the stock system.
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.
WTB Headlight hinge hardware
