It Really Works
All I can say is the drive back to Florida was significantly better with Block It installed. It's not Cadillac quite, but the road noise it much less at highway speeds. Even at lower speeds while running exhaust in track mode, the exhaust sound was clearer and not as cluttered as before.






I forgot to include the following in my reply above............I bought that 'crazy cowboy' sound deadening kit and had that installed in my coupe. It dropped the interior noise down to the level of the convertible. I then also added the Block-it pad the OP alludes to, and I think that also helped..................just hard to be sure on the latter as the crazy cowboy kit (he is a Forum vendor) worked so well.
If I had to do it over again, I would have started with the Block-It pad to see if that sufficed, then if not, added the Crazy Cowboy kit. I only say this because I am not that handy, and if my memory serves me correctly, I think it cost me about $600 to have the kit installed by a reputable body shop. Results were well worth it though.
Last edited by Steve Garrett; Jul 15, 2017 at 11:40 PM. Reason: Merged Posts




All I can say is the drive back to Florida was significantly better with Block It installed. It's not Cadillac quite, but the road noise it much less at highway speeds. Even at lower speeds while running exhaust in track mode, the exhaust sound was clearer and not as cluttered as before.

Great to meet you and then hear from you afterwards! We received calls from other who purchased the Blockit at the show and were also happy with their ride home.
We appreciate the kind words and the time you took to post them

Ed
Last edited by TKO Performance; Sep 2, 2016 at 10:12 AM.
Foam is thick and blends with the factory carpet. Installation took me less than 1 minute.
At first i didn't notice any difference but this might be for highway use.
On the highway, i could still hear tire noise but the exhaust sound was muffled a bit more. I keep my exhaust mode in track and i do have a borla catless xpipe so it is slightly louder than a stock Z. I noticed the exhaust track is muffled. I would say there's a reduction of 10% total noise.
I don't think a stock Z was ever noisy on the highway, but i would imagine really long trips i might be annoying to some.
I don't take my car on long trips. I just bought this kit because i figure the less tire noise the better, even though the tire noise from the start didn't bother me much.
It's still there though. It's ok.






Foam is thick and blends with the factory carpet. Installation took me less than 1 minute.
At first i didn't notice any difference but this might be for highway use.
On the highway, i could still hear tire noise but the exhaust sound was muffled a bit more. I keep my exhaust mode in track and i do have a borla catless xpipe so it is slightly louder than a stock Z. I noticed the exhaust track is muffled. I would say there's a reduction of 10% total noise.
I don't think a stock Z was ever noisy on the highway, but i would imagine really long trips i might be annoying to some.
I don't take my car on long trips. I just bought this kit because i figure the less tire noise the better, even though the tire noise from the start didn't bother me much.
It's still there though. It's ok.
The Best of Corvette for Corvette Enthusiasts
As far as the seats. I just moved the back section of the seat and slid the foam right behind it. I put my seat far back enough to where it actually stays in place. The foam is thick and the way i position my seats, the backing of the seat actually touches the foam so it stays in place.
This kit doesn't go under the carpet. I don't think it was designed that way.
If you want that type of installation, there's other stuff on the market that's most likely better, IMHO.
As far as the seats. I just moved the back section of the seat and slid the foam right behind it. I put my seat far back enough to where it actually stays in place. The foam is thick and the way i position my seats, the backing of the seat actually touches the foam so it stays in place.
This kit doesn't go under the carpet. I don't think it was designed that way.
If you want that type of installation, there's other stuff on the market that's most likely better, IMHO.
I bought the BlockIt as well from West Coast Corvette and then covered it with a Lloyds mat from AutoAnything. Both items on sale and free shipping. The noise is much less, but you still get a fair amount of road noise. I have a Camaro ZL1 and did the same and it is much quieter. I would still recommend the BlockIt for the Corvette as long as you cover it with another mat. With those two items it is over an inch in thickness.
Driving habits and settings unchanged. Exhaust still in track mode, i cruise in 5th gear unless i'm going 65+, then i'll shift into 6th. But all 5th gear cruising today.
I notice tire noise coming from under the seat and towards the firewall by the engine.
So maybe the block it kit does work as it suppressed whatever sound was coming from the rear, that now the sound i'm still hearing is underneath the seats and towards the firewall.
Oh well.
Driving habits and settings unchanged. Exhaust still in track mode, i cruise in 5th gear unless i'm going 65+, then i'll shift into 6th. But all 5th gear cruising today.
I notice tire noise coming from under the seat and towards the firewall by the engine.
So maybe the block it kit does work as it suppressed whatever sound was coming from the rear, that now the sound i'm still hearing is underneath the seats and towards the firewall.
Oh well.
I have had this kit in my 16 Z06 from day 1. Never drove it without it.
Its on top of carpet.





Driving habits and settings unchanged. Exhaust still in track mode, i cruise in 5th gear unless i'm going 65+, then i'll shift into 6th. But all 5th gear cruising today.
I notice tire noise coming from under the seat and towards the firewall by the engine.
So maybe the block it kit does work as it suppressed whatever sound was coming from the rear, that now the sound i'm still hearing is underneath the seats and towards the firewall.
Oh well.
First, Thank you for your purchase. Much appreciated.
If you noticed your car getting a little more quiet after some time from the Blockit, that's not unusual. The reason for this is the pieces have all straightened out. Everything is lying flat and more flush. The foam has expanded back to its full shape. When we ship the Blockit its rolled. So the pieces take a few days to get back to there original shape.
You will notice the radio sounds a little better. Talking to a passenger and Bluetooth becomes a little easier too.
Yes the Blockit will help knock down noise from the rear (where most comes from) so now you might notice other noises coming from the front. But hang in there, we are going to me releasing some amazing new products both for sound and an actual heat shielding (if needed).
The textured top actually looks nice however you can absolutely put a Lloyds mat on top of it.
As far as the seats. I just moved the back section of the seat and slid the foam right behind it. I put my seat far back enough to where it actually stays in place. The foam is thick and the way i position my seats, the backing of the seat actually touches the foam so it stays in place.
The pieces that go behind the seat actually stand up in place even with out the seat touch them.
To show people who have never seen this kit, this is what the pieces behind the seat look like (installed). Once the seat is back into position, you can't see them...

Ed

Serving The Corvette Forum For 25 Years!!
Allow us to add you to the list of extremely satisfied customers.
Order Securely Online 24/7: http://tkoperformance.com/index.html
Feel Free To Contact Us By Phone: 1800 -778- 9898 Monday- Friday 9:00am to 4:30pm
Click Here: http://www.facebook.com/pages/TKO-Pe...e/367433626633
God Bless America!
Last edited by TKO Performance; Jul 17, 2017 at 06:12 PM.




Ed

Simply awesome to hear. Real glad your happy with the Camaro application too!!
Ed









