WTB AIR injection piping for 1999 C5
Thread Starter
Racer
Joined: Jul 2002
Posts: 302
Likes: 0
From: Manassas VA
WTB AIR injection piping for 1999 C5
After passing many times, I failed inspection in VA after they spotted the block off plate on my headers. It doesn't look like GM sells the parts I need anymore so I'm wondering if someone has the piping they'd like to sell. The only parts I'm missing is the metal part that mounts to the headers, and the first piece of black piping that connects to that. It looks like ECS left the AIR pump and the other hosing in place. Car is a 99 with TPIS long tubes.
Thanks for any help,
Mike
Manassas, VA
Thanks for any help,
Mike
Manassas, VA
Last edited by SCREAMS; Jan 25, 2017 at 05:26 PM.
Premium Supporting Vendor
Joined: Oct 2004
Posts: 23,599
Likes: 1,226
From: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Let me check for you tomorrow, I had so much of that stuff but it may have been tossed. If I have it it's yours.
Safety Car
Joined: Aug 2013
Posts: 3,962
Likes: 64
I have my complete system for sale I pulled out of my 03 z06 not sure if its the same but it sounds like it per your descrition.. IF doug doesnt have it letme know and Ill sell any little part needed... dAMN VA is rediclous I have heard but now see it again 
Premium Supporting Vendor
Joined: Oct 2004
Posts: 23,599
Likes: 1,226
From: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
I'm almost positive the piping is different from your year to his. Mounts to a different tube on the headers/manifold.
Safety Car
Joined: Aug 2013
Posts: 3,962
Likes: 64
HEY im just trying to help out here... Im throwing it in trash soon since Im cleaning up the garage soon and I dont see any use for it for anyone since any slight mod does away with this (or at least I thought it did) ...
Thread Starter
Racer
Joined: Jul 2002
Posts: 302
Likes: 0
From: Manassas VA
Thanks to both of you. I don't even need it to work. I'm just planning on mounting it to the block off plate and running the hose out of sight, with a mousetrap at the end of it in case he traces it. 
Doug, if you have any of them, please let me know. GXPZ06, I appreciate your help. If you're local, it's probably worth taking a shot. All I really need is the metal part that mounts to the header where the block off plate is, and the first black hose. Let me know.
Thanks,
Mike
Doug, if you have any of them, please let me know. GXPZ06, I appreciate your help. If you're local, it's probably worth taking a shot. All I really need is the metal part that mounts to the header where the block off plate is, and the first black hose. Let me know.
Thanks,
Mike
thanks.. Im local to him so if you dont have it Ill meet him somewhere and Im sure whatever I have will work to satisfy the visual inspection (which is rediculous did I mention that lol) ... I just see it working because all After market headers are the same for 97-04 corrrect ? (at least I thought so) .. so if its a rubber pipe coming out it does have clamps and Im sure it could be suited..
HEY im just trying to help out here... Im throwing it in trash soon since Im cleaning up the garage soon and I dont see any use for it for anyone since any slight mod does away with this (or at least I thought it did) ...
HEY im just trying to help out here... Im throwing it in trash soon since Im cleaning up the garage soon and I dont see any use for it for anyone since any slight mod does away with this (or at least I thought it did) ...
7th Gear
Joined: Oct 2016
Posts: 7
Likes: 0
From: Detroit Michigan
Can you post a couple of photos of what you have for sale? I had a tuner shop add long tube headers to my 03 C5 corvette and I don't think they provided the correct parts back to me. I want to keep all of the original parts for this car, so a photo or two would really help confirm I have what I need. Thanks
Thread Starter
Racer
Joined: Jul 2002
Posts: 302
Likes: 0
From: Manassas VA
I found this picture when I was digging around:
http://s215.photobucket.com/user/2br...ION_2.jpg.html
http://s215.photobucket.com/user/2br...ION_2.jpg.html
Can you post a couple of photos of what you have for sale? I had a tuner shop add long tube headers to my 03 C5 corvette and I don't think they provided the correct parts back to me. I want to keep all of the original parts for this car, so a photo or two would really help confirm I have what I need. Thanks
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Racer
Joined: Jul 2002
Posts: 302
Likes: 0
From: Manassas VA
Doug, did you get a chance to see if you had any of the AIR stuff? I just need some of the piping. I need to get my ECS supercharger back on the road!
Thanks,
Mike
Thanks,
Mike
Advanced
Joined: Oct 2016
Posts: 68
Likes: 7
After passing many times, I failed inspection in VA after they spotted the block off plate on my headers. It doesn't look like GM sells the parts I need anymore so I'm wondering if someone has the piping they'd like to sell. The only parts I'm missing is the metal part that mounts to the headers, and the first piece of black piping that connects to that. It looks like ECS left the AIR pump and the other hosing in place. Car is a 99 with TPIS long tubes.
Thanks for any help,
Mike
Manassas, VA
Thanks for any help,
Mike
Manassas, VA
Instructor
Joined: Jul 2008
Posts: 215
Likes: 1
From: Kennewick Washington
slight highjacking
The front of my 2002 Z06 was cobbled together by a previous owner so I need a couple parts.
I need: The AIR pump bracket that screws into the radiator support and all the screws and nuts to hold the bracket. I also need 2 of the rubber mounts to connect the pump to the bracket. I have one rubber mount. Do you guys have any of these items? How much shipped to 99338.
Thanks.
Rex
I need: The AIR pump bracket that screws into the radiator support and all the screws and nuts to hold the bracket. I also need 2 of the rubber mounts to connect the pump to the bracket. I have one rubber mount. Do you guys have any of these items? How much shipped to 99338.
Thanks.
Rex