Led Expert need here
Thread Starter
Drifting
Joined: Sep 2014
Posts: 1,579
Likes: 59
From: Trieste Italy
Led Expert need here
I'm troubling with led bulbs 95 vette.
4 red led bulbs tailights in, and all other bulbs are incandescent car properly works.
If even two amber front bulbs led are in, car blinker still works if parking lights are off.
If i turn on light then blinker stuck on
Already tried tridon el32 electromechanical and cf12anl flasher led. Both same thing: blinker stuck on
4 red led bulbs tailights in, and all other bulbs are incandescent car properly works.
If even two amber front bulbs led are in, car blinker still works if parking lights are off.
If i turn on light then blinker stuck on
Already tried tridon el32 electromechanical and cf12anl flasher led. Both same thing: blinker stuck on
Last edited by Christi@n; Mar 12, 2017 at 08:15 PM.
Thread Starter
Drifting
Joined: Sep 2014
Posts: 1,579
Likes: 59
From: Trieste Italy
I'm searching around, find out this..they explain something...but is notsolving my trouble...
http://www.ebay.com/gds/LED-Turn-Sig...6783681/g.html
I would not install resistor...if would be possible
It is also possible that cf12anl is not the right one for my car.
A guy here reccomended me to use ef32...
http://www.ebay.com/gds/LED-Turn-Sig...6783681/g.html
I would not install resistor...if would be possible
It is also possible that cf12anl is not the right one for my car.
A guy here reccomended me to use ef32...
Last edited by Christi@n; Mar 12, 2017 at 10:35 AM.
Team Owner
Joined: Sep 2003
Posts: 25,398
Likes: 2,743
Where are you buying your LED? In Italy or USA and shipped to you?
Provide a part# off of the invoice that you've got that mentions part# specifically. Post the actual invoice if you can maybe!!
All LED #'s for what you're using for external lighting!
Provide a part# off of the invoice that you've got that mentions part# specifically. Post the actual invoice if you can maybe!!
All LED #'s for what you're using for external lighting!
Thread Starter
Drifting
Joined: Sep 2014
Posts: 1,579
Likes: 59
From: Trieste Italy
Thread Starter
Drifting
Joined: Sep 2014
Posts: 1,579
Likes: 59
From: Trieste Italy
1157 bulb size 2835 chip 15 SMD amber --- It is for the front park light/turn signal has 15 led
1157 bulb size 2835 chip 27 SMD red --- it is for the four rear tail/stop/turn has 27 led
The strange thing it is that cf12anl has no minimum load required, so should works, instead it is not working
Would this one be better?
https://www.superbrightleds.com/more...asher/779/833/
1157 bulb size 2835 chip 27 SMD red --- it is for the four rear tail/stop/turn has 27 led
The strange thing it is that cf12anl has no minimum load required, so should works, instead it is not working
Would this one be better?
https://www.superbrightleds.com/more...asher/779/833/
Last edited by Christi@n; Mar 12, 2017 at 10:57 AM.
Thread Starter
Drifting
Joined: Sep 2014
Posts: 1,579
Likes: 59
From: Trieste Italy
As matter of fact i've not invoice or part number.. This is the only things i've have about bulbs...
I've made some other test today...
Wagner 323, 552, cf12anl01, el32, all these flasher won't go...
Amber led bulbs are not responsible, since i've put them in tailight and properly works
The only case that entire system properly works both with lights on or off is the hazard... This case blinker works...
The story is definetly getting weirder...would be curios what hazard flasher i've in?
Seems to be a load trouble according with the owner manual. In fact AFAIR, if an incandescent bulb is blow out then Blinker stuck on manual says
I've made some other test today...
Wagner 323, 552, cf12anl01, el32, all these flasher won't go...
Amber led bulbs are not responsible, since i've put them in tailight and properly works
The only case that entire system properly works both with lights on or off is the hazard... This case blinker works...
The story is definetly getting weirder...would be curios what hazard flasher i've in?
Seems to be a load trouble according with the owner manual. In fact AFAIR, if an incandescent bulb is blow out then Blinker stuck on manual says
Last edited by Christi@n; Mar 12, 2017 at 08:16 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Team Owner
Joined: Sep 2003
Posts: 25,398
Likes: 2,743
http://www.ebay.com/itm/1995974-1991...-/322056577234
It's just the first image I came to that will validate/answer your question.
I believe what you've got in the snapshot is the cruise control cut-off relay. Is it right next to the flasher left of column? look at 8A-201-24
Last edited by WVZR-1; Mar 12, 2017 at 08:02 PM.