When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just received and installed my AFF02 from PK Auto Design and I am very pleased with the purchase experience as well as with how they turned out. I purchased them as a package with tires, sensors, and lugs and everything arrived in perfect condition. I also weighed the stock and new wheels, F- 56.0# stock, 54.8# AFF02, R- 63.4# stock, 61.4# AFF02.
Thank you very much!! Both front and rear stick out a bit more, I like it although I may have to Xpel a little higher in the rear. I only have it up to the body line above the rear brake ducts.
Here are wheel specs:
They are very nice indeed and suit the car well! I would say that you gained close to 1" in the rear offset and at least 3/4" in the front. They appear to be very flush with the fender lips, which is exactly how it should be! I would bet you have close to 2" more track width in the rear now!
You'll need to add more film to those areas...because they're going to throw up more sand and rocks than you can imagine.
I did the same thing by adding Cray wheels on my Z, also with a huge offset, and while they look fantastic now...rocks and sand chips are far more so than before.
Just received and installed my AFF02 from PK Auto Design and I am very pleased with the purchase experience as well as with how they turned out. I purchased them as a package with tires, sensors, and lugs and everything arrived in perfect condition. I also weighed the stock and new wheels, F- 56.0# stock, 54.8# AFF02, R- 63.4# stock, 61.4# AFF02.
My new wheels Ace Alloy AFF02
:rock :