When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
From: Philadelphia PA (Birthplace of the USA, UNESCO World Heritage City)
Help the C5 Community avoid the Corvette Tax and Identify this Hyperflash Connector!
I'd like to make my own hyperflash harness but with plug and play connectors rather than requiring wire splicing. Similar to the hood seal situation, where you can buy your own generic hood seal rather than pay the Corvette tax and get one made "for Corvette", I'd like to buy my own universal flasher (which seem to be around $10 on Amazon/ebay) but with a GM/Corvette-specific connector.
I just need to figure out what connector this is that's connected to the flasher (see picture of example hyperflash harness below). I believe it's a GM/Delphi connector that's either stock or used in some other GM car/application.
I know one can buy a hyperflash harness for $40-$45, but if we can all save $20 each, why not?
Last edited by ArmchairArchitect; Jan 10, 2018 at 09:15 PM.
The one for the flasher seems to be like this one. It is a universal connector for 3-prong flashers and 3-prong sealed beam headlights. It's $2.97 at Summit
It should fit a LED flasher like the one below, which can handle loads from 20mA to 20A without a problem.
Help the C5 Community avoid the Corvette Tax and Identify this Hyperflash Connector!
