The move from Deb Red to Deb Vader is coming 
Thanks for all the pics 
The Sinister Black C7 ZR1 Thread....
Racer
Joined: Apr 2013
Posts: 325
Likes: 128
From: Pflugerville TX
Well, mine should be pretty easy. I'm having a "clear bra" PPF installed on the entire car. No chips and no swirl marks. Can use a California Duster and not worry.
Last edited by SLBelt; Apr 2, 2018 at 11:51 AM.
Burning Brakes
Joined: Jan 2006
Posts: 769
Likes: 170
From: Milwaukee WI
Congrats Steve, your Z looks off the charts menacing. Where did you purchase your red wheel lip decals? I have a black on black ZTK coupe set for NCM delivery on 5/17 and really like the red accents on the wheel lips.
Racer
Joined: Apr 2013
Posts: 325
Likes: 128
From: Pflugerville TX
They were ordered from RPI designs and are from a company called RimPro-Tec. HOWEVER, I have to call them now because I have a problem with them. They go on in two pieces. First the "track" which goes around the edge of the wheels and adheres via something like 3M tape. Then the colored "insert" gets pushed into the track. Very easy install and I agree they look good. However, after installation I went out for a short demo ride with someone and when I came home (really less than 10 minutes), three of the red inserts were gone!!! The tracks were still there but apparently the inserts blew out. So, I need to find out what the deal is. They're not expensive (about $100 for the set), but they need to last more than 10 minutes.
Burning Brakes
Joined: Jan 2006
Posts: 769
Likes: 170
From: Milwaukee WI
They were ordered from RPI designs and are from a company called RimPro-Tec. HOWEVER, I have to call them now because I have a problem with them. They go on in two pieces. First the "track" which goes around the edge of the wheels and adheres via something like 3M tape. Then the colored "insert" gets pushed into the track. Very easy install and I agree they look good. However, after installation I went out for a short demo ride with someone and when I came home (really less than 10 minutes), three of the red inserts were gone!!! The tracks were still there but apparently the inserts blew out. So, I need to find out what the deal is. They're not expensive (about $100 for the set), but they need to last more than 10 minutes.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Burning Brakes
Joined: Jan 2017
Posts: 771
Likes: 220
From: Saint Clair Shores Michigan
Moderator
Joined: Jul 2005
Posts: 29,353
Likes: 3,887
From: West MI
CF Banner Relay Captain
West MI & JAX/NE Florida
Events Coordinator
St. Jude Donor '11-'17, '21
That is so BA, theme music too 
