The Sinister Black C7 ZR1 Thread....
Burning Brakes
Joined: Jan 2006
Posts: 769
Likes: 170
From: Milwaukee WI
Steve, your car its absolutely sick... your mods are aesthetically tasteful and add a wow factor to your car. Must even look more striking in person.
If you don't mind me asking, where did you purchase the red pin striping used your spoiler/ground effects/wing?
Also, are you planning on adding the Jake decal to your CF engine cover?
If you don't mind me asking, where did you purchase the red pin striping used your spoiler/ground effects/wing?
Also, are you planning on adding the Jake decal to your CF engine cover?
Racer
Joined: Apr 2013
Posts: 325
Likes: 128
From: Pflugerville TX
Steve, your car its absolutely sick... your mods are aesthetically tasteful and add a wow factor to your car. Must even look more striking in person.
If you don't mind me asking, where did you purchase the red pin striping used your spoiler/ground effects/wing?
Also, are you planning on adding the Jake decal to your CF engine cover?
If you don't mind me asking, where did you purchase the red pin striping used your spoiler/ground effects/wing?
Also, are you planning on adding the Jake decal to your CF engine cover?
The pin striping was a total experiment. I knew I wanted the look but wasn't ready to commit to paint in case I didn't like it. So, I ordered a role of 1/4" vinyl pin striping tape. Did a little checking on Amazon to find the right one, and I'm happy with the results. I'll probably have the striping painted on eventually, but for now the vinyl looks pretty good.
The is the link to the one I bought on amazon:
As far as adding the Jake decal, I need to see one with it on. To your point, I'm trying to add some wow, but not go overboard.
Last edited by SLBelt; May 1, 2018 at 12:27 PM. Reason: added a comment
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Nov 2001
Posts: 6,905
Likes: 205
From: Kern County CA
Thanks!
The pin striping was a total experiment. I knew I wanted the look but wasn't ready to commit to paint in case I didn't like it. So, I ordered a role of 1/4" vinyl pin striping tape. Did a little checking on Amazon to find the right one, and I'm happy with the results. I'll probably have the striping painted on eventually, but for now the vinyl looks pretty good.
The is the link to the one I bought on amazon:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
As far as adding the Jake decal, I need to see one with it on. To your point, I'm trying to add some wow, but not go overboard.
The pin striping was a total experiment. I knew I wanted the look but wasn't ready to commit to paint in case I didn't like it. So, I ordered a role of 1/4" vinyl pin striping tape. Did a little checking on Amazon to find the right one, and I'm happy with the results. I'll probably have the striping painted on eventually, but for now the vinyl looks pretty good.
The is the link to the one I bought on amazon:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
As far as adding the Jake decal, I need to see one with it on. To your point, I'm trying to add some wow, but not go overboard.
Thanks,
Supporting Vendor
Joined: Apr 2010
Posts: 20,551
Likes: 793
From: Medina OH
This one fits the bill here, anything you guys need hollar!! With the new Anrky wheels and gonna have akra and some go fasttt goodies!
__________________
#1 Forged Wheel Master Distributor for Corvettes Worldwide since 2010
Call/Text 440-915-6166
Forgeline*Anrky*HRE*AL13*Brixton*MV Forged* and Many More....
REVIEWS: http://forums.corvetteforum.com/whee...r-reviews.html
WEBSITE: www.cw4L.com
EMAIL: sales@cw4L.com
PHONE 440-915-6166 CALL OR TEXT ANYTIME!!!
Follow us on Instagram @custom_wheels_for_less
Call/Text 440-915-6166
Forgeline*Anrky*HRE*AL13*Brixton*MV Forged* and Many More....
REVIEWS: http://forums.corvetteforum.com/whee...r-reviews.html
WEBSITE: www.cw4L.com
EMAIL: sales@cw4L.com
PHONE 440-915-6166 CALL OR TEXT ANYTIME!!!
Follow us on Instagram @custom_wheels_for_less
Thread Starter
Melting Slicks
Joined: Oct 2005
Posts: 3,142
Likes: 4,246
From: Hailing From The Mean Streets Of Irvine, California
There's a whole lotta 'Awesome' in this photo... 
Save The Wave,
Corvette_Nut
Save The Wave,
Corvette_Nut
Last edited by Corvette_Nut; May 16, 2018 at 02:14 PM.
