F/S 1965 BB 396 carb/ manifold
09-01-2016, 06:04 PM
#1
F/S 1965 BB 396 carb/ manifold
Holley carburetor # 3124 correct metering blocks #4456/#4519 . The correct peanut primary bowl , the secondary bowl is not correct . $1,275 sold
Winters snow flake rectangular port manifold , there are no repair , welds , or helicoils $575 .
Holley peanut primary Bowl sold
Winters snow flake rectangular port manifold , there are no repair , welds , or helicoils $575 .
Holley peanut primary Bowl sold
Last edited by Ken O'Neal; 10-31-2017 at 10:31 PM.
04-26-2017, 10:30 AM
#3
3124 Holley Carb
Holley carburetor # 3124 correct metering blocks #4456/#4519 . The correct peanut primary bolw , the secondary bowl is not correct . $1,275
Winters snow flake rectangular port manifold , there are no repair , welds , or helicoils $575 .
Holley peanut primary bolw sold
Winters snow flake rectangular port manifold , there are no repair , welds , or helicoils $575 .
Holley peanut primary bolw sold
Thanks
Longhornlarryhttps://www.corvetteforum.com/forums/images/smilies/patriot.gif
04-26-2017, 11:28 AM
#4
Good morning Larry ,
The carburetor is available , the manifold is an original GM snow flake manifold , but there's no casting date on the bottom . My research on is it was purchased as an over the counter manifold .
Thanks for your interest , I can be contacted for more information by my cell # 215 869 8286
Thanks Ken ,
The carburetor is available , the manifold is an original GM snow flake manifold , but there's no casting date on the bottom . My research on is it was purchased as an over the counter manifold .
Thanks for your interest , I can be contacted for more information by my cell # 215 869 8286
Thanks Ken ,
04-27-2017, 12:16 PM
#8
Drifting
