FS: FS: Sparco SPX seats and install kit
#1
FS: Sparco SPX seats and install kit
Update 6/6/17 SEATS ARE SOLD
Hello All,
I am selling my Sparco SPX seats out of my 2008 Z06. I have used them for about 1000 miles or so. I love the look of these seats but they sit about a 1/4" higher with the sliders than the stock seats. Since I am 6'5" I cant afford any less head room. I would not recommend these seats for anyone over 6'2"
These seats are in great condition. There is a small scratch in the carbon fiber on the driver side from installation (see pic). It can probably be filled with clear nail polish and buffed out.
Im selling it with sparco seat brackets that I modified:
Driver side modified to sit as low as possible.
Passenger side was modified to clear the ECM that is located under the passenger seat.
I will also include the a passenger side air bag sensor bladder so you dont need to pull yours out of your seat and the airbag resistor plugs that i got from vetteworks.
These seats are black on black. and weigh about 28 lbs each.
So here is what you get:
- Sparco SPX seat pair
- Sparco seat sliders
- Sparco seat brackets (modified) for C6
- Sparco mounting hardware kit
- Vetteworks airbag fooler plugs for driver side and passenger side
- OEM passenger airbag sensor bladder
These seats sell for $2600 - $2900 each so please no low ballers
Price is $5000 picked up in souther California. Add 3% for paypal. I can ship, but buyer pays for shipping and it will be expensive because of the insured value.
Hello All,
I am selling my Sparco SPX seats out of my 2008 Z06. I have used them for about 1000 miles or so. I love the look of these seats but they sit about a 1/4" higher with the sliders than the stock seats. Since I am 6'5" I cant afford any less head room. I would not recommend these seats for anyone over 6'2"
These seats are in great condition. There is a small scratch in the carbon fiber on the driver side from installation (see pic). It can probably be filled with clear nail polish and buffed out.
Im selling it with sparco seat brackets that I modified:
Driver side modified to sit as low as possible.
Passenger side was modified to clear the ECM that is located under the passenger seat.
I will also include the a passenger side air bag sensor bladder so you dont need to pull yours out of your seat and the airbag resistor plugs that i got from vetteworks.
These seats are black on black. and weigh about 28 lbs each.
So here is what you get:
- Sparco SPX seat pair
- Sparco seat sliders
- Sparco seat brackets (modified) for C6
- Sparco mounting hardware kit
- Vetteworks airbag fooler plugs for driver side and passenger side
- OEM passenger airbag sensor bladder
These seats sell for $2600 - $2900 each so please no low ballers
Price is $5000 picked up in souther California. Add 3% for paypal. I can ship, but buyer pays for shipping and it will be expensive because of the insured value.
Last edited by bornloser_182; 06-06-2017 at 01:50 PM.
#10
Le Mans Master
They should. C6 has a larger well than a C5, so if it fits a C6, it will fit a C5. Base mounting points are the same.
Us big and tall guys have it rough - the seats I have took quite a bit of work to get the brackets to the point to match (a little bit lower) the stock height.
Us big and tall guys have it rough - the seats I have took quite a bit of work to get the brackets to the point to match (a little bit lower) the stock height.
#14
Melting Slicks
What a beautiful seat do these recline? Ever thought of changing to a different seat bracket? I hear the Sparco universal brackets aren't too good. I had the old style mirrad sliders & they kept me low like oem on my Recaros. Mirrad has come out with a fixed seat mount that sits even lower now. I think MTI racing also has super low seat mounts