What did you do to your C5 today?
#1
Melting Slicks
Thread Starter
What did you do to your C5 today?
I thought this would be a good place for us to post what we are doing to our C5's which can help share ideas/pictures of your daily project(s).
Ill start - today I replaced my directional bulb, after buying my first jack...Im very proud of myself cause I've never been a DIY guy...
Im now going to be getting her ready for the upcoming Car Shows in my local area!!
What did you do to your C5 today?
Ill start - today I replaced my directional bulb, after buying my first jack...Im very proud of myself cause I've never been a DIY guy...
Im now going to be getting her ready for the upcoming Car Shows in my local area!!
What did you do to your C5 today?
The following 6 users liked this post by Mayor111:
AkGrown71_C5 (11-25-2021),
Eurx (05-07-2023),
Keyman57 (01-09-2022),
mike48750 (04-21-2017),
MusicCityMan243 (01-27-2020),
and 1 others liked this post.
The following users liked this post:
Keyman57 (01-09-2022)
The following 10 users liked this post by SuperTom:
Brimis (01-13-2021),
capaletta (06-10-2019),
chevyorange (11-21-2020),
Gobygred (06-08-2020),
LAGary (12-28-2019),
and 5 others liked this post.
#4
1/4 mile/AutoX
Drove it in the sunshine of Oklahoma !!! (and no dirt road)
The following users liked this post:
terryg (04-08-2022)
The following 4 users liked this post by Slo Yelo C5:
#7
Running Guns & Moonshine
Replaced Optima red top with sears agm diehard. Added extended terminal bolts to make wiring easier.
The following 3 users liked this post by Tusc:
#8
She's sitting pretty in the garage. Getting some decent storms up here in NE Ohio...
The following 3 users liked this post by AnabolicZod:
#9
I'm paying the price for having the dealership replace my oil pressure sensor.
After I got the car back it started intermittently going into limp mode.
I tracked the problem to a messed up connection at the throttle position sensor.
Now I'm looking for a rubber connector for the air bridge that was destroyed during the sensor replacement.
Guess who's doing the replacement the next time?
dan k.
After I got the car back it started intermittently going into limp mode.
I tracked the problem to a messed up connection at the throttle position sensor.
Now I'm looking for a rubber connector for the air bridge that was destroyed during the sensor replacement.
Guess who's doing the replacement the next time?
dan k.
Last edited by photonhunter; 04-20-2017 at 12:18 PM. Reason: Something is introducing an unwanted link on the word "oil".
#10
I'm finally getting around to installing all the cool stuff I bought over the winter.
K&N intake went on a few days ago, last night I started installing radio flyer headlights then I will get to the B&B exhaust.
K&N intake went on a few days ago, last night I started installing radio flyer headlights then I will get to the B&B exhaust.
#11
Le Mans Master
Member Since: Jun 2007
Location: Eastern Corn-Nation
Posts: 6,779
Received 3,866 Likes
on
1,672 Posts
2015 C5 of the Year Winner
I actually put the temp cover on it to keep the dust to a minimum because my show season is OVER.... I am going to change my new to me mufflers Saturday morning though........That's why the temp cover. After that it will get the regular cover for a few months.
The following 6 users liked this post by mstromquist:
C-5 Geek (10-09-2022),
FrankLP (09-03-2020),
jg84 (09-07-2023),
Markwall (12-08-2020),
MrLarge252 (05-20-2023),
and 1 others liked this post.
The following users liked this post:
Tusc (07-23-2021)
The following users liked this post:
C82021 (06-11-2022)
The following 20 users liked this post by 1982Tad:
bsmurf1 (04-15-2021),
C-5 Geek (10-09-2022),
Cfive4life (06-07-2023),
chevynor (08-19-2023),
Dirty Dog (07-15-2023),
and 15 others liked this post.
#17
Race Director
Pro Mechanic
Member Since: Mar 2004
Location: Fort Wayne IN
Posts: 12,242
Received 810 Likes
on
430 Posts
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
I Believe In The Beer Fairy
Took a full shift of overtime so I can get a new set of heads for my car sometime this year.
The following 2 users liked this post by Fastbird:
Noblebro175 (10-15-2022),
TMODcustoms (06-08-2022)
#18
Racer
Yesterday I installed the c6 shifter. It replaced a B&M Ripper which I didn't care for too much. Can't wait to have it out this weekend... if it doesn't rain.
Today hopefully I'll have time to add the steering wheel emblem I got for it. Waiting for other misc parts to arrive too.
Today hopefully I'll have time to add the steering wheel emblem I got for it. Waiting for other misc parts to arrive too.
#19
The following 3 users liked this post by sloopdawg:
#20
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,704
Received 19,226 Likes
on
13,933 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Stared at it in the garage. Rainy day here plus I went to work for most of the morning and afternoon.