Paint protection film poll
#3
Race Director
Member Since: Jul 2007
Location: Texas Hill Country
Posts: 10,763
Received 2,379 Likes
on
1,238 Posts
shoulda started a poll....
mine is xpel'd
where do you live?
https://www.corvetteforum.com/forums...es-videos.html
mine is xpel'd
where do you live?
https://www.corvetteforum.com/forums...es-videos.html
The following users liked this post:
tail_lights (04-23-2017)
#5
shoulda started a poll....
mine is xpel'd
where do you live?
https://www.corvetteforum.com/forums...es-videos.html
mine is xpel'd
where do you live?
https://www.corvetteforum.com/forums...es-videos.html
The following users liked this post:
406Z06 (04-23-2017)
#12
Semper Fidelis,
Rob
The following users liked this post:
AllFlash (04-24-2017)
#14
Race Director
Xpel on all impact zones. Front bumper may need warranty work as there are wavy areas, however, I am very pleased with how it is working and the ease of maintenance with it (and ceramic coating) on
Last edited by tail_lights; 04-23-2017 at 11:39 PM.
The following users liked this post:
406Z06 (04-23-2017)
#15
#16
Racer
I did whole front end, rockers, rear quarters in xpel, had side skirts installer, and a K&N air filter for $1600.
The following users liked this post:
406Z06 (04-24-2017)
#17
Amat Victoria Curam
XPEL on all impact areas, that is, everywhere except roof and tail.
Then a twice a year glazing with a polymer wax, which is what XPEL recommends.
Then a twice a year glazing with a polymer wax, which is what XPEL recommends.
The following users liked this post:
406Z06 (04-24-2017)
The following users liked this post:
406Z06 (04-24-2017)
#19
Melting Slicks
Suntek ultra on about 70% of my z06
The following users liked this post:
406Z06 (04-24-2017)
The following users liked this post:
406Z06 (04-24-2017)