FS: 98 435 Mallett Conversion 51k miles
#1
98 435 Mallett Conversion 51k miles
Hi guys, new to the forum. I have a 98 435 Mallett #22 of only 23 produced. I'm looking to sell It due to it not being used. It's been sitting on a lift in my garage for 3 years now and it's time to let it go to someone who will enjoy it.
The car has 51k miles, I've owned it for 10 years and only put 2k miles on it. It has all the original documentation from Mallett Cars along with all the badging. You can visit mallettcars.com to get full 435 conversion specs. You can also find build history for every car.
I haven't posted it for sale anywhere yet, I thought it would be better to offer it to people who appreciate corvettes.
As I said, I'm new to this forum (forums in general), I've attached a couple pictures, but unsure if I did it correctly. I'll answer any questions anyone has the best I can. And will try to add more pictures once I get the car cleaned up.
Asking $23k
The car has 51k miles, I've owned it for 10 years and only put 2k miles on it. It has all the original documentation from Mallett Cars along with all the badging. You can visit mallettcars.com to get full 435 conversion specs. You can also find build history for every car.
I haven't posted it for sale anywhere yet, I thought it would be better to offer it to people who appreciate corvettes.
As I said, I'm new to this forum (forums in general), I've attached a couple pictures, but unsure if I did it correctly. I'll answer any questions anyone has the best I can. And will try to add more pictures once I get the car cleaned up.
Asking $23k
The following users liked this post:
CorvetteBrent (06-24-2018)
#2
Drifting
Location, more pictures (especially of interior), and how best to reach you would be helpful.
Also, it looks like there are a lot of options available. It would be good to see the list of what your car has.
Link -> http://www.mallettcars.com/?p=944
Also, it looks like there are a lot of options available. It would be good to see the list of what your car has.
Link -> http://www.mallettcars.com/?p=944
Last edited by wydopnthrtl; 05-10-2017 at 05:57 AM.
#3
Drifting
Dayum I WANT THIS CAR !
Bump for a very special coupe.
Bump for a very special coupe.
#5
Drifting
Mike, she sure cleaned up nice ! You just don't come across a coupe THIS good very often. What a fantastic piece of Corvette history.
#6
Located in Muskegon, Mi. Message me if you have any question.
The car does have a rebuilt tittle.
The car does have a rebuilt tittle.
Last edited by Vetteman Jack; 05-15-2017 at 10:22 PM. Reason: No need to quote all the pics again.
#8
6.1 liter (372 ci)
-4340-AQ Billet crank w/knife edge counterweights
-4340-AQ Billet connecting rods
-Forged Pro-Lite pistons w/hardened light weight wrist pins
-complete assembly balanced
-Custom CNC ported and flow matched heads
-LS-6 intake manifold
-Billet cam
-4340 push rods
-Carbon fiber valve cover and radiator covers
-B&B headers
-B&B stainless exhaust. (black ceramic coated)
-Stillen slotted roders
-AP 1600 series calipers w/stainless steel lines,6 piston front,4 piston rear
-Penske 8100 series dual adjustable coilovers with remote dampener on all 4 corners
-Mallett road race front and rear sway bars
-Black Mallett twin 5 spoke wheels
-Billet Mallett shifter
-Carbon fiber 427 hood
-Simpson 5 point harnesses
-Mallett build tags and documentation
-4340-AQ Billet crank w/knife edge counterweights
-4340-AQ Billet connecting rods
-Forged Pro-Lite pistons w/hardened light weight wrist pins
-complete assembly balanced
-Custom CNC ported and flow matched heads
-LS-6 intake manifold
-Billet cam
-4340 push rods
-Carbon fiber valve cover and radiator covers
-B&B headers
-B&B stainless exhaust. (black ceramic coated)
-Stillen slotted roders
-AP 1600 series calipers w/stainless steel lines,6 piston front,4 piston rear
-Penske 8100 series dual adjustable coilovers with remote dampener on all 4 corners
-Mallett road race front and rear sway bars
-Black Mallett twin 5 spoke wheels
-Billet Mallett shifter
-Carbon fiber 427 hood
-Simpson 5 point harnesses
-Mallett build tags and documentation
The following users liked this post:
CorvetteBrent (06-24-2018)
#12
Racer
Gawd I wish I had the cash. Nice car.
#13
Melting Slicks
Another Mallett in West MI!? im in Grand Rapids. I sold my Mallett Hammer Z06 #02-009 here just over a year ago. Malletts are definitely special cars! Mine had had all the same options your appears to have plus some, with the exception of the 372ci engine. Like yours, mine spend more time sitting around than being driven, and I got so sick of keeping black clean! I bought mine in 2013 with 4,000 miles on it and sold it with just over 13,000 miles. Good luck with the sale of your car! Here was my for sale add: https://www.corvetteforum.com/forums...low-miles.html
Last edited by Mallett Z; 06-16-2017 at 05:13 AM.
#14
Another Mallett in West MI!? im in Grand Rapids. I sold my Mallett Hammer Z06 #02-009 here just over a year ago. Malletts are definitely special cars! Mine had had all the same options your appears to have plus some, with the exception of the 372ci engine. Like yours, mine spend more time sitting around than being driven, and I got so sick of keeping black clean! I bought mine in 2013 with 4,000 miles on it and sold it with just over 13,000 miles. Good luck with the sale of your car! Here was my for sale add: https://www.corvetteforum.com/forums...low-miles.html
#16
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 343,004
Received 19,303 Likes
on
13,975 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Nice looking C5 with a desirable performance upgrade from Mallet. GLWS.