FS: Van Steel Camber Plate Kit for C6Z, ZR1
#1
Tech Contributor
Thread Starter
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,089
Received 8,928 Likes
on
5,333 Posts
Van Steel Camber Plate Kit for C6Z, ZR1
I sold my C6Z so have the Van Steel Camber Plate kit from the car.
I don't have the upper stud kit as that went with the car. The Van Steel Rear Plates and bolts were never used as I had a set of Pfadt Plates in the rear.
Price including shipping $195.00 in the lower 48.
Here is a link to the Van Steel Page so you can see what the new kit looks like and costs.
VS-97459-1 2006 - 2013 Camber Plate Kit - Aluminum Frame - Lower Half: https://www.vansteel.com/index.cfm?f...tle=VS-97459-1
If you want the upper studs you can order studs and nuts from Grainger or two Van Steel Stud Kits. The Z06 and ZR1 require two kits for a total of 16 studs.
Bill
I don't have the upper stud kit as that went with the car. The Van Steel Rear Plates and bolts were never used as I had a set of Pfadt Plates in the rear.
Price including shipping $195.00 in the lower 48.
Here is a link to the Van Steel Page so you can see what the new kit looks like and costs.
VS-97459-1 2006 - 2013 Camber Plate Kit - Aluminum Frame - Lower Half: https://www.vansteel.com/index.cfm?f...tle=VS-97459-1
If you want the upper studs you can order studs and nuts from Grainger or two Van Steel Stud Kits. The Z06 and ZR1 require two kits for a total of 16 studs.
Bill
Last edited by Bill Dearborn; 05-25-2017 at 09:24 PM.
#2
Tech Contributor
Thread Starter
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,089
Received 8,928 Likes
on
5,333 Posts
ttt
#3
Tech Contributor
Thread Starter
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,089
Received 8,928 Likes
on
5,333 Posts
ttt