New suspension coming up!
#1
New suspension coming up!
This Sunday and Monday I am going to refurbish my entire suspension.
I have all new Moog balljoints and front inner and outer tie rods. Rear gm inner and outer tierods as well as all the control arm bushings in poly. I also have all new hardware for the bushings, got the zip corvette kit.
To finish it off I will be installing Viking coilovers as well.
I have all new Moog balljoints and front inner and outer tie rods. Rear gm inner and outer tierods as well as all the control arm bushings in poly. I also have all new hardware for the bushings, got the zip corvette kit.
To finish it off I will be installing Viking coilovers as well.
#4
Melting Slicks
Member Since: Mar 2009
Location: Odessa FL
Posts: 2,300
Received 113 Likes
on
99 Posts
St. Jude Donor '10-'12-'13-'14-'15-'16-'17
Subscribing for updates. I did all the same recently except for the control arm bushings. I have the poly bushings and a full set of extra control arms, curious how you remove the OEM rubber bushings from the control arms.
#5
Tech Contributor
Member Since: Dec 1999
Location: Anthony TX
Posts: 32,736
Received 2,180 Likes
on
1,583 Posts
CI 6,7,8,9,11 Vet
St. Jude Donor '08
HEY!!!!!! I have the exact same kitchen floor!
BC
BC
#7
That is actually our balcony tile. I live on tje 8th floor of an apartment building outside Osa AFB in South Korea. All this work will be completed off of jackstands in my parking lot.
#8
Tech Contributor
Member Since: Dec 1999
Location: Anthony TX
Posts: 32,736
Received 2,180 Likes
on
1,583 Posts
CI 6,7,8,9,11 Vet
St. Jude Donor '08