American Racing Headers - C7 offerings
#1
Premium Supporting Vendor
Thread Starter
American Racing Headers - C7 offerings
Hi Corvette owners,
ARH would like to recap on the available C7 header and exhaust systems that we are currently offering for you.
C7 & C7/Z06 2014 & Up Mid-Length System
https://americanracingheaders.com/co...-length-system
For C7 we offer a second, more emissions friendly option aptly named our 1-3/4" Mid Length header system. Our Mid Length kit allows you to reuse the secondary set of factory cats combined with our "Severe Duty" 49 State Legal cats. Our objective with this system is to improve performance yet eliminate the possibility of an engine light (without a tune). The kit is a direct bolt-in made entirely in the US using 304 S/S throughout. Expect a quick and easy install with Grade 8 hardware and Flat Out Racing gaskets.
C7 & C7/Z06 2014 & Up Long System
https://americanracingheaders.com/co...up-long-system
Our C7 line is available wiith various options that allow you to fine tune your system to match your upgrades. ARH C7 systems set the bar for quality, performance, fit and ease of installation.
Options include 1-3/4" 1-7/8" or 2" primaries, merge collectors with scavenger spikes, ARH exclusive X-Pipe forward location and optional "Severe Duty" 49 State Legal Cats. The system ends at the rear axle, and is a direct fit to stock or aftermarket Axlebacks. Backed by customer service that's given ARH our outstanding reputation, our ARH C7 system will surpass your expectations in quality and performance. Expect a quick and easy install with Grade 8 hardware and Flat Out Racing gaskets.
Product features on ALL American Racing Headers systems include:
100% Made in the USA - Never Outsourced
Made entirely of 304 stainless steel
3/8" thick laser-cut flanges for a warp-free seal
Hand-ported TIG welded inlets
Optimized primary tube routing for superior fit and performance
Merge collectors complete with welded scavenger spikes
Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability
You may contact us to order by using the form request on our website, PM, Phone, or our dealer locator here: DEALER LOCATOR
Thanks for checking in with us!
ARH would like to recap on the available C7 header and exhaust systems that we are currently offering for you.
C7 & C7/Z06 2014 & Up Mid-Length System
https://americanracingheaders.com/co...-length-system
For C7 we offer a second, more emissions friendly option aptly named our 1-3/4" Mid Length header system. Our Mid Length kit allows you to reuse the secondary set of factory cats combined with our "Severe Duty" 49 State Legal cats. Our objective with this system is to improve performance yet eliminate the possibility of an engine light (without a tune). The kit is a direct bolt-in made entirely in the US using 304 S/S throughout. Expect a quick and easy install with Grade 8 hardware and Flat Out Racing gaskets.
C7 & C7/Z06 2014 & Up Long System
https://americanracingheaders.com/co...up-long-system
Our C7 line is available wiith various options that allow you to fine tune your system to match your upgrades. ARH C7 systems set the bar for quality, performance, fit and ease of installation.
Options include 1-3/4" 1-7/8" or 2" primaries, merge collectors with scavenger spikes, ARH exclusive X-Pipe forward location and optional "Severe Duty" 49 State Legal Cats. The system ends at the rear axle, and is a direct fit to stock or aftermarket Axlebacks. Backed by customer service that's given ARH our outstanding reputation, our ARH C7 system will surpass your expectations in quality and performance. Expect a quick and easy install with Grade 8 hardware and Flat Out Racing gaskets.
Product features on ALL American Racing Headers systems include:
100% Made in the USA - Never Outsourced
Made entirely of 304 stainless steel
3/8" thick laser-cut flanges for a warp-free seal
Hand-ported TIG welded inlets
Optimized primary tube routing for superior fit and performance
Merge collectors complete with welded scavenger spikes
Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability
You may contact us to order by using the form request on our website, PM, Phone, or our dealer locator here: DEALER LOCATOR
Thanks for checking in with us!
Last edited by AR Headers; 06-19-2017 at 03:25 PM.
#4
Premium Supporting Vendor
Thread Starter
Thank you to all of those who came out to Carlisle and had a set of headers installed. We greatly appreciate your support!
Team ARH
Team ARH