FS: Z51/GS/Z06 TSW Nurburgring 18x10.5 ET65 + Pirelli 305/315 + TPMS - Excellent setup!
#1
Sr.Random input generator
Thread Starter
Z51/GS/Z06 TSW Nurburgring 18x10.5 ET65 + Pirelli 305/315 + TPMS - Excellent setup!
SOLD
I've bought a set of TSW Nurbugring wheels in Matte Gunmetal for use at the track, just last month. After I did, I ended up getting a very good deal for forged wheels, and they will be here soon. As such, I no longer need this set. I used them for about 1 day total (kept switching with my other wheel set with R7 tires for 2 days).
They do clear C7 Z06 (iron) brakes, and this works well with GS/Z06. Fitment is a bit tight for Z51, but it worked for me (see pic below).
Asking only $1200 + shipping for all.
1.
2.
3.
4.
One of them touched my brake ducting inside.
This is Z51 with Z06 brakes and fender spats.
I've bought a set of TSW Nurbugring wheels in Matte Gunmetal for use at the track, just last month. After I did, I ended up getting a very good deal for forged wheels, and they will be here soon. As such, I no longer need this set. I used them for about 1 day total (kept switching with my other wheel set with R7 tires for 2 days).
They do clear C7 Z06 (iron) brakes, and this works well with GS/Z06. Fitment is a bit tight for Z51, but it worked for me (see pic below).
- TSW 18x10.5 ET65 in Matte Gunmetal (Only 21 lbs each)
- Pirelli DH scrubs 305/660/18x2, 315/680/18x2.
- TPMS sensors
- All mounted, balanced, and TPMS installed.
- Since they are very sticky tires, they collected a lot of extra rubber from track. It usually gets cleaned away after a bit of driving, or at the track.
Asking only $1200 + shipping for all.
1.
2.
3.
4.
One of them touched my brake ducting inside.
This is Z51 with Z06 brakes and fender spats.
Last edited by X25; 10-22-2017 at 05:32 AM.
#3
Sr.Random input generator
Thread Starter
Yes, this was actually the track setup of a C7 Z06 owner that I've copied from. Note: they clear C7 Z06 iron brakes.
#4
Sr.Random input generator
Thread Starter
Sale pending to a local friend
#6
Sr.Random input generator
Thread Starter
They were sold, today. Thank you for your interest!
The following users liked this post:
ya3coub (10-22-2017)