Sean_C

Picked up the car yesterday from Cordes performance racing (CPR) and am very taken away at the results. I drove home in typical Friday 5 oclock traffic and it was very well mannered. it drives very easy with minimal effort over stock, it almost feels stockish aside from all the noise and rocking/thumping the cam makes. I got LOTS of looks and a couple thumbs up on my drive home. because of traffic I didn't really get to get on it very much, plus I'm still on 325 Michelin pilot sports. the car does scream though. I gave it the goose in 2nd gear at like 3k rpms and it threw me back pretty hard. stock IM/TB along with 91 are holding it back some, but a MSD/102 and flex fuel are certainly in it's future.

stock baseline was 436/414

Mods:
WCCH heads ported and milled (.30)
BTR stage 2 cam
ARH 2" catless headers
Airaid CAI
staright pipe/muffler delete

after was on same dyno
made 543/494

nuke61

Nice results, your stock whp is very close to what mine was.

Unreal

Car looked great

Sean_C

u went alpha cam right?

thx man, get to work on those coils now!

rio95

Intake, TB and E85 now!

jayyyw

Good results. Bet it drives like a dream. My BTR 3 was pretty easy to drive as well.

Cordes Performance Racing

Pleasure working with you sir! Thank you so much for trusting us with your car

TXGS507

Read nothing but good things about CPR... A lot of fast cars out of AZ... Very nice.

MTPZ06

Solid results without having to go crazy on the cam. I like it!

Must_Have_Z

I have a custom cam with very similar specs to the BTR 2 and made about 560 with throttle body and intake. Rides just like you said - almost like stock but the cam lope and shake is awesome! Great work! Enjoy!

cseaman

Hell yeah, you know my take on the cam!

Sean_C

thx again Joe!.... I look forward to the next round of mods in the near future.

their work and customer satisfaction/word of mouth speaks for itself.... which is why they will be the only ones that work on the car.

thank you!!

sweet, that's what I'm hoping to be around when I do the MSD/102 setup....560+whp would be nice along with hopefully over 500wtq.

FNBADAZ06

Outstanding !!!!
Great to see all these Z06's in the greater valley showing up

Joe Breidenbach

Nice! I just got mine back from DRM. BTR2, PRC 265 heads (were already on the car), halltech mf103, ported stock TB, stock IM, ARH 1-7/8” catted through B&B Bullets. Dynojet at 541whp and 502 whtq. On 91 with 10% ethanol. No prior dyno there as the motor was hurt when i brought it in. Im thrilled. I have the same thoughts of an MSD and NW combo looking for 560whp +.

SPDKLZ1

Excellent numbers, Joe!

Joe Breidenbach

Thank you. I need to update my thread with everything done and some pics. I made the 4 hr drive home to put it in the garage and hop a plane to vegas so ill get to it next week.

Blackkaz04

Thanks for the post OP. Do you live in Phoenix? I am considering a H/C/I through Joe for my c6z but I’d love a ride to see and hear/seat of the pants feel what I’m paying for......any chance we could meet up sometime in the next few weeks?

nuke61

Joe's shop is ~90 minutes from Tuscon. You could probably call him and get a ride in something that you're thinking about.

Sean_C

​​​​​​​I'm in Chandler....I go to the pavilions in Scottsdale pretty frequently.... I don't know if u know what it is, but it's a big car show every Saturday with all makes and models up by talking stick resort.

AzDave47

Nice power from a mild cam. Joe and his CPR crew do good work. I'm guessing your idle is set down in the 750-800 rpm range?