FS: Billy Boat Shorty Stepped Headers
#1
Burning Brakes
Thread Starter
Billy Boat Shorty Stepped Headers
I have a set of Billy Boat Shorty Stepped Headers that have 7K miles on them. These are for a 2001-2004 C5 Corvette Base or Z06. Parts #: FCOR-0257
I'm including all hardware to install them:
1. Brand new OEM and Billy Boat exhaust manifold gasket sets
2. Brand new air injection pipe gaskets
3. Brand new headers to heads mounting bolts
4. Brand new header exhaust manifold to Cat mounting bolts
5. I'm also throwing in a set of 8-6" High-Heat Kevlar spark plug wire boots
SOLD on 02-22-18
I'm including all hardware to install them:
1. Brand new OEM and Billy Boat exhaust manifold gasket sets
2. Brand new air injection pipe gaskets
3. Brand new headers to heads mounting bolts
4. Brand new header exhaust manifold to Cat mounting bolts
5. I'm also throwing in a set of 8-6" High-Heat Kevlar spark plug wire boots
SOLD on 02-22-18
Last edited by CJ1957; 02-22-2018 at 03:30 PM. Reason: SOLD on 02-22-18
#7
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,668
Received 19,218 Likes
on
13,928 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Do these directly bolt onto the rest of the exhaust without any cutting and welding? In other words, are they direct replacements for the stock exhaust manifolds that just bolt to the rest of the exhaust without any modification?
Were there any problems installing the headers - for instance is there any interference with the header or other parts (like the starter) when installing?
Thanks.
Were there any problems installing the headers - for instance is there any interference with the header or other parts (like the starter) when installing?
Thanks.
#8
Burning Brakes
Thread Starter
Answers
Do these directly bolt onto the rest of the exhaust without any cutting and welding? In other words, are they direct replacements for the stock exhaust manifolds that just bolt to the rest of the exhaust without any modification?
Were there any problems installing the headers - for instance is there any interference with the header or other parts (like the starter) when installing?
Thanks.
Were there any problems installing the headers - for instance is there any interference with the header or other parts (like the starter) when installing?
Thanks.
Sorry for the late reply, I've been away for the last few days.
To answer your questions, they do bolt on the the rest of the exhaust system in that they bolt directly to the catalytic converters.
There is no welding and they actually drop right in from the top on both sides. You only have to remove the alternator to drop in the drivers side.
Hope that takes care of your questions, Joe