20% OFF! Personalized Renderings of your Corvette! - Monaco Auto Design
#1
Supporting Vendor
Thread Starter
20% OFF! Personalized Renderings of your Corvette! - Monaco Auto Design
Hello, Corvette Forum! Brian here from Monaco Auto Design to let you know that my 20% off discount is back yet again! All personalized renderings now start at only $80 each! Additional discounts offered for 2 or more renderings! Discount offer ends Friday, February 2nd, 2018 at 11:59pm. All information needed is below, but please don't hesitate to send a PM or email monacoautodesign@gmail.com if you have any questions.
How are these created?
Custom templates are created which are then modified to match your vehicle’s exact specification. Upon completion, I send you a high resolution print-ready file which you can then have printed.
What do you need from me?
- 2 to 3 images of your vehicle. The images you provide are NOT used in the rendering, and are only used for reference.
- Choose either a front 3/4 or rear 3/4 angle (OR BOTH!) for your rendering(s). Custom templates for different angles are available at an additional charge.
- (Optional) Full Name & VIN number to be included in the ‘plaque’ within the rendering
Can I print my rendering to hang on my wall? If so, how big?
Yes! The recommended print size for a rendering is 17” x 11”. You may go slightly bigger, but I usually warn against going too big as to not compromise the overall print quality.
Can you add cosmetic modifications that are not on my vehicle currently? Such as wheels, aero, stripes, etc?
Absolutely!
How long does it take?
Currently, turn around time is 1 week.
How much does this cost?
Renderings are now $80 each (normally $100), and can vary slightly depending on additional vehicle modifications and/or special requests such as backgrounds, added cosmetics, and other personalizations.
I went to your website, and I’m still confused. Is this the only service you offer?
This is one of many automotive rendering services I offer. Other services include Personal design consulting, Body & Cosmetic design, Photo editing, Vector artwork, Marketing & Promotional material, Logos & Branding. I invite you to check out my website at www.monacoautodesign.com to see my latest projects.
Check out some recent renderings for other Corvette Forum members!
WATCH THE RENDERING PROCESS HERE!
Thanks!
-Brian
How are these created?
Custom templates are created which are then modified to match your vehicle’s exact specification. Upon completion, I send you a high resolution print-ready file which you can then have printed.
What do you need from me?
- 2 to 3 images of your vehicle. The images you provide are NOT used in the rendering, and are only used for reference.
- Choose either a front 3/4 or rear 3/4 angle (OR BOTH!) for your rendering(s). Custom templates for different angles are available at an additional charge.
- (Optional) Full Name & VIN number to be included in the ‘plaque’ within the rendering
Can I print my rendering to hang on my wall? If so, how big?
Yes! The recommended print size for a rendering is 17” x 11”. You may go slightly bigger, but I usually warn against going too big as to not compromise the overall print quality.
Can you add cosmetic modifications that are not on my vehicle currently? Such as wheels, aero, stripes, etc?
Absolutely!
How long does it take?
Currently, turn around time is 1 week.
How much does this cost?
Renderings are now $80 each (normally $100), and can vary slightly depending on additional vehicle modifications and/or special requests such as backgrounds, added cosmetics, and other personalizations.
I went to your website, and I’m still confused. Is this the only service you offer?
This is one of many automotive rendering services I offer. Other services include Personal design consulting, Body & Cosmetic design, Photo editing, Vector artwork, Marketing & Promotional material, Logos & Branding. I invite you to check out my website at www.monacoautodesign.com to see my latest projects.
Check out some recent renderings for other Corvette Forum members!
WATCH THE RENDERING PROCESS HERE!
Thanks!
-Brian
__________________
Monaco Auto Design
Automotive rendering & design
www.monacoautodesign.com
Instagram - @monacoautodesign
Facebook - www.facebook.com/monacoautodesign
YouTube - https://www.youtube.com/channel/UCmt...7-VxqqaF5CSNJQ
Monaco Auto Design
Automotive rendering & design
www.monacoautodesign.com
Instagram - @monacoautodesign
Facebook - www.facebook.com/monacoautodesign
YouTube - https://www.youtube.com/channel/UCmt...7-VxqqaF5CSNJQ
Last edited by Monaco Auto Design; 02-01-2018 at 08:29 PM.
The following users liked this post:
TEXHAWK0 (01-31-2018)
The following users liked this post:
Monaco Auto Design (01-20-2018)
The following users liked this post:
Monaco Auto Design (01-20-2018)
#6
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,362
Received 7,752 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
Great stuff, Brian!
The following users liked this post:
Monaco Auto Design (01-22-2018)
#8
Race Director
Beautiful work Brian.
#10
Supporting Vendor
Thread Starter
ANOTHER ONE! This forum member also wanted to see how some potential modifications would look on his C7 Stingray convertible....Can you spot the additions?
-Brian
-Brian
The following users liked this post:
Monaco Auto Design (01-27-2018)
#12
Supporting Vendor
Thread Starter
#14
Supporting Vendor
Thread Starter