What’s going on guys , I have a few parts from my cam swap, these parts have roughly 5k on them and were installed by Tsp back in 2014 by previous owner of car . My 2008 zo6 made 590rwhp/545tq on a dynojet, with this cam. I also went 10.19@139 with this setup . Only reason I changed cam is Bc I had to replace my harmonic balancer (went with a Ati) so while I had everything torn apart I swapped cam out with a stage 4 cam. This is Tsp stage 3 cam , and it made great power and sounds nasty at idle. I Also have a 90mm Nitrous Outlet plate system for sale.kit is 100% complete with everything you need as if u bought it new . I have tried to sell just the 90mm plate, Bc now I need a 102mm plate Bc I went with a Msd atomic and a Nw 102 ...No one was biting on just the plate so I decided to sell the whole system complete. You can save yourself almost $300.

~$140 Texas Speed & Performance LS7S camshaft 242/250 .648”/.648” (with 1.8:1 rocker ratio 114 lsa)

~$40 Texas Speed & Performance 7.800 Chromoly Ls7 Pushrods , 3/8 diameter with 5/16 ball ends

~$45 Factory Ls7 lifters

~$500 Nitrous Outlet 90mm plate system complete w/solenoids, hardware, hardlines, 10lb bottle
http://www.nitrousoutlet.com/efi-wet...te-system.html

Buyer pays shipping and PayPal fees on all parts . Thanks Jason

Only thing I have to remove from car is feed line from bottle and relays

Friday eve Bumppppp

Lifters and pushrods still for sale