Notices
C5 General General C5 Corvette and C5 Z06 Discussion not covered in Tech
Sponsored by:
Sponsored by:

[Z06] aftermarket wheel width

Thread Tools
 
Search this Thread
 
Old 02-23-2018, 05:54 PM
  #1  
grassblaster
Pro
Thread Starter
 
grassblaster's Avatar
 
Member Since: Sep 2013
Posts: 511
Received 10 Likes on 10 Posts

Default aftermarket wheel width

so i'm in the market for some aftermarket wheels for my z06. interested in the ccw classics specifically

I believe it came stock with 9.5 on the front?

how about for the rear? it came with 10.5 pretty certain. what's everyone go with for the back? can 11 fit under there? or is that a hassle worrying about rubbing and brake ducts? or does it look crazy it it sticks out
Old 02-24-2018, 12:28 AM
  #2  
striper
Le Mans Master
 
striper's Avatar
 
Member Since: May 2005
Location: Fort Lauderdale, Florida
Posts: 6,366
Received 246 Likes on 215 Posts

Default

I had CCW Classics on my Z06. I ran 18" wheels front and rear, 10" wide fronts and 11" wide rears. I had them on for several years with absolutely no problems of any kind. I sold them a while back to go with larger diameter wheels. You'll have no problems with those sizes.
Old 02-24-2018, 12:36 AM
  #3  
pewter99
Team Owner

Support Corvetteforum!
 
pewter99's Avatar
 
Member Since: Dec 1999
Location: Here
Posts: 174,233
Received 1,194 Likes on 704 Posts
Pilot of Beer Force 1
Tampa Regional Coordinator
CI 4-5-6-7-8 Veteran
Organizer St. Jude Fundraiser
I believe in the Beer Fairy


Default

Originally Posted by striper
I had CCW Classics on my Z06. I ran 18" wheels front and rear, 10" wide fronts and 11" wide rears. I had them on for several years with absolutely no problems of any kind. I sold them a while back to go with larger diameter wheels. You'll have no problems with those sizes.


I ran Mallet 18 x 9.5 and 18 x 11's with 335/30 on the rear no rubbing and the car was lowered
Old 02-24-2018, 08:49 AM
  #4  
grassblaster
Pro
Thread Starter
 
grassblaster's Avatar
 
Member Since: Sep 2013
Posts: 511
Received 10 Likes on 10 Posts

Default

Originally Posted by striper
I had CCW Classics on my Z06. I ran 18" wheels front and rear, 10" wide fronts and 11" wide rears. I had them on for several years with absolutely no problems of any kind. I sold them a while back to go with larger diameter wheels. You'll have no problems with those sizes.
ok that's great to know.

Originally Posted by pewter99


I ran Mallet 18 x 9.5 and 18 x 11's with 335/30 on the rear no rubbing and the car was lowered
ok great. that's a nice wide tire. Did they stick out a bit?

Get notified of new replies

To aftermarket wheel width




Quick Reply: [Z06] aftermarket wheel width



All times are GMT -4. The time now is 01:07 AM.