C2 coupe birdcage
#1
C2 coupe birdcage
First lower birdcage after power coat. The spare rails will be for a
stainless steel one we are going to try in the near future.
Upper birdcage will be a mixed composite with steel inserts for the
dash and firewall to Z bar support rods.
Will post more pictures during assembly
stainless steel one we are going to try in the near future.
Upper birdcage will be a mixed composite with steel inserts for the
dash and firewall to Z bar support rods.
Will post more pictures during assembly
The following 7 users liked this post by GARRETM-FABTRON:
Bangkok Dean (08-28-2019),
Bob's 64 (04-21-2018),
Coe56 (04-23-2018),
Frankie the Fink (04-21-2018),
frankturbo (10-31-2021),
and 2 others liked this post.
#4
Yes complete from scratch all made in house. There are two sets of
the front hinge and rear latch towers going into restomods and the
feedback has been positive.
Making the firewall and pedal assemblies next , should have this all
together with the vintage air setup using the original ductwork and
switch locations , will post more pictures.
The following users liked this post:
Mike C#2 (10-31-2021)
#5
Safety Car
Are you selling these? If so, I'm scared to ask how much. They do look beautiful.
#6
Race Director
#8
Melting Slicks
First lower birdcage after power coat. The spare rails will be for a
stainless steel one we are going to try in the near future.
Upper birdcage will be a mixed composite with steel inserts for the
dash and firewall to Z bar support rods.
Will post more pictures during assembly
stainless steel one we are going to try in the near future.
Upper birdcage will be a mixed composite with steel inserts for the
dash and firewall to Z bar support rods.
Will post more pictures during assembly
https://www.corvetteforum.com/forums...ssenblies.html
Last edited by Poorhousenext; 04-22-2018 at 09:44 PM.
The following users liked this post:
GARRETM-FABTRON (04-23-2018)
#9
Race Director
The following users liked this post:
1960 (11-20-2021)
#11
Pro
Impressive work.
#12
Race Director
Member Since: Jan 2002
Location: Close to DC
Posts: 14,539
Received 2,126 Likes
on
1,465 Posts
C2 of the Year Finalist - Modified 2020
Very impressive! Next thing we know, someone will rebuild the old assembly plant in St Louis and we'll crank out new C-2's. Progress exceeded by talent. Dennis
#13
Drifting
#14
Race Director
He hasn’t posted in almost 3 years so you may need to hunt down the address of his shop to get an answer to that question.
#15
Team Owner
Member Since: Aug 2008
Location: Rochester NY
Posts: 31,358
Received 5,009 Likes
on
2,528 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17-'18-‘19-'20-'21-'22-'23-'24
#16
Instructor