2LT seats in 1LT
#1
Advanced
Thread Starter
2LT seats in 1LT
I just purchased a set of 2LT red seats for my 1LT
Wondering if anyone here has done this swap before and if it would be plug and play or I need to do anything with modules?
Thanks in advance!
Wondering if anyone here has done this swap before and if it would be plug and play or I need to do anything with modules?
Thanks in advance!
The following users liked this post:
Rebel Yell (05-07-2018)
#3
Drifting
Anyone have anything to add this subject. There is an old thread on this but I don't think there was a final conclusion as to whether or not they got all the functions to work and if they got the airbags to register properly. Thanks
#4
Advanced
Thread Starter
No CEL or Airbag lights
#5
Le Mans Master
Member Since: Jan 2006
Location: Down south in Dixie
Posts: 6,801
Received 2,639 Likes
on
1,702 Posts
Good deal Midnight. But, in my 1LT the seats go up/down. There must have been a problem there.
#7
Le Mans Master
Member Since: Jan 2006
Location: Down south in Dixie
Posts: 6,801
Received 2,639 Likes
on
1,702 Posts
#8
2LT Seats in a 1LT
Update! I installed them last week no issues. Cooling and Heating might work but I dont have dash buttons. 1LT passenger seat did not go up and down before. Now it does with 3LT. All done in my garage in about 1.5 hrs with moving seat belts over.
No CEL or Airbag lights
#9
Melting Slicks
I hope this is true as I was thinking of the same 2LT seats installed in a 1LT. Do not care about the heated/cooled and memory. But wondered if the lumbar works? Was there any issue with the main power connector? Any photos?