Halltech DRED Hood
05-14-2018, 05:58 PM
#1
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
Halltech DRED Hood
We have two hoods in stock ready to ship. They are glossy pre-preg outer and inner. $3370 which includes boxing shipping is additional.
__________________
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
262-510-7600
For service email:
orders@halltechsystems.com
www.halltechsystems.com
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
262-510-7600
For service email:
orders@halltechsystems.com
www.halltechsystems.com
05-14-2018, 06:04 PM
#2
Sweet !!!! Are you starting up production again, or was this new old stock ?
05-14-2018, 07:20 PM
#3
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
05-14-2018, 08:04 PM
#4
Team Owner
I swear there was a couple guys on here looking for these in the past few months...
05-17-2018, 10:08 AM
#8
Burning Brakes
This hood is the best constructed best looking hood on the planet.
Those of you lusting for this hood should act quickly as they will sell in the blink of an eye.
Those of you lusting for this hood should act quickly as they will sell in the blink of an eye.
05-17-2018, 10:15 AM
#9
Racer
05-17-2018, 01:32 PM
#10
Supporting Vendor
god i love this hood, seen one in person and it is absolute perfection.
05-17-2018, 01:42 PM
#11
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
05-17-2018, 02:56 PM
#12
Safety Car
05-17-2018, 06:49 PM
#13
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
05-18-2018, 05:51 PM
#15
Burning Brakes
OK Guys, I got the first one! If you want the 2nd one you better pull the trigger fast.
I got a call from Jim Hall to advise me on shipping. What a fine gentleman! Good news coming from Halltech, but it's Jim's to tell.
I got a call from Jim Hall to advise me on shipping. What a fine gentleman! Good news coming from Halltech, but it's Jim's to tell.
05-19-2018, 12:10 AM
#17
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
One left
These are not seconds; they were made in advance of sales, and we had too many price increases and material shortages, which lead to suspending sales back in 2015.
We do have two more, but they are seconds, and I do not know for what reason. If a thread is out of place, and you are planning on painting the top anyway, it might be worth looking into one of the two.
We have one NOS left ready to ship.
We do have two more, but they are seconds, and I do not know for what reason. If a thread is out of place, and you are planning on painting the top anyway, it might be worth looking into one of the two.
We have one NOS left ready to ship.
05-26-2018, 09:31 AM
#19
Burning Brakes
My new Halltech DRED Carbon Fiber Hood arrived yesterday and I wanted to share the unboxing pics.
First a shout out to Jim Hall for an outstanding job of packing the hood. It arrived in perfect condition. The box was strapped in the vertical orientation to a properly sized pallet preventing direct contact with other freight during transit. Inside the box, the hood was protected by 4 to 6 inches of closed-cell foam to absorb any potential impacts. The hood was further protected by a layer of bubble wrap with the edges completely bounded by foam tubing (noodles).
The suspense is building.
It finally emerges!
Wow! This thing is feathery light! Just 13 lbs on my shipping scale.
This hood seems very rigid for being so light. Some aftermarket hoods are extremely flexible and this one seems as stiff or stiffer than the OEM hood.
Thanks again, Jim!
First a shout out to Jim Hall for an outstanding job of packing the hood. It arrived in perfect condition. The box was strapped in the vertical orientation to a properly sized pallet preventing direct contact with other freight during transit. Inside the box, the hood was protected by 4 to 6 inches of closed-cell foam to absorb any potential impacts. The hood was further protected by a layer of bubble wrap with the edges completely bounded by foam tubing (noodles).
The suspense is building.
It finally emerges!
Wow! This thing is feathery light! Just 13 lbs on my shipping scale.
This hood seems very rigid for being so light. Some aftermarket hoods are extremely flexible and this one seems as stiff or stiffer than the OEM hood.
Thanks again, Jim!