Who built your LT5?
05-16-2018, 02:10 PM
#1
Melting Slicks
Thread Starter
Who built your LT5?
Well, We've done this in the past for LS7s and LS9s, so let's see those signature plates from the good folks at the Performance Build center!
My gem was built by the talented Mr. Anthony Terry. I'm trying to get the break in miles on it asap so I can hit the track at CoTA.
As you can see from the avatar, I have a real soft spot for ZR1s, dating back 30 years. Still hard to fathom that the new LT5 more than doubles the power output of the original.
I still remember my first chassis dyno at MTI.....344 rwhp was quite an achievement in a day when your new $65k ZR-1 still was equipped with both a cassette player and one of those newfangled CD slots.
My gem was built by the talented Mr. Anthony Terry. I'm trying to get the break in miles on it asap so I can hit the track at CoTA.
As you can see from the avatar, I have a real soft spot for ZR1s, dating back 30 years. Still hard to fathom that the new LT5 more than doubles the power output of the original.
I still remember my first chassis dyno at MTI.....344 rwhp was quite an achievement in a day when your new $65k ZR-1 still was equipped with both a cassette player and one of those newfangled CD slots.
Last edited by DoctorV8; 05-16-2018 at 02:14 PM.
The following users liked this post:
ilkSurfer (08-09-2018)
05-17-2018, 12:20 PM
#2
The C7 Corvette ZR1 Registry over at the Corvette Action Center has a running list of engine builders at the bottom:
https://www.corvetteactioncenter.com...-zr1-registry/
https://www.corvetteactioncenter.com...-zr1-registry/
05-18-2018, 09:00 AM
#3
Le Mans Master
hi doc do you have 3 gens of ZR-1 now?
Still rocking the old LSV, has 105k miles on her now.
Like to see if we can round up all 4 gens of ZR-1 at carlisle this year
Still rocking the old LSV, has 105k miles on her now.
Like to see if we can round up all 4 gens of ZR-1 at carlisle this year
05-18-2018, 09:07 AM
#4
Moderator
Member Since: Jul 2005
Location: West MI
Posts: 27,698
Received 3,621 Likes
on
1,740 Posts
CF Banner Relay Captain
West MI & JAX/NE Florida
Events Coordinator
St. Jude Donor '11-'12-'13-'14-'15-'16-'17, '21
Always a fun thread, sticky
The following users liked this post:
dee zed (11-07-2021)
05-21-2018, 10:36 AM
#7
Melting Slicks
Thread Starter
Hey Ron, I sold my C6 ZR1 to a friend, but might buy it back in the future. All great cars. Glad you are well.
05-28-2018, 02:47 PM
#9
Instructor
06-01-2018, 12:00 PM
#10
Well, We've done this in the past for LS7s and LS9s, so let's see those signature plates from the good folks at the Performance Build center!
My gem was built by the talented Mr. Anthony Terry. I'm trying to get the break in miles on it asap so I can hit the track at CoTA.
As you can see from the avatar, I have a real soft spot for ZR1s, dating back 30 years. Still hard to fathom that the new LT5 more than doubles the power output of the original.
I still remember my first chassis dyno at MTI.....344 rwhp was quite an achievement in a day when your new $65k ZR-1 still was equipped with both a cassette player and one of those newfangled CD slots.
My gem was built by the talented Mr. Anthony Terry. I'm trying to get the break in miles on it asap so I can hit the track at CoTA.
As you can see from the avatar, I have a real soft spot for ZR1s, dating back 30 years. Still hard to fathom that the new LT5 more than doubles the power output of the original.
I still remember my first chassis dyno at MTI.....344 rwhp was quite an achievement in a day when your new $65k ZR-1 still was equipped with both a cassette player and one of those newfangled CD slots.
06-01-2018, 12:23 PM
#11
Melting Slicks
Thread Starter
06-01-2018, 12:30 PM
#12
Enjoy both.....
The following users liked this post:
DoctorV8 (06-07-2018)
07-11-2018, 07:06 PM
#18
Funny to note—he built my 2015 ZO7 LT4 also!
07-20-2018, 06:33 AM
#19
Melting Slicks
Member Since: May 2006
Location: Westchester County New York
Posts: 2,934
Received 258 Likes
on
171 Posts
I wonder how far in advance they build the engines...
08-09-2018, 05:42 PM
#20
Instructor
