RossG

Bought a pre-owned C6Z that had the Billy Boat Bullets on it. Love the aggressive sound, but the drone is too much for my tastes. Want something with a little volume,but without the drone. Can anyone weigh in on the Fusion Bi-Mode that Billy Boat offers? I want to try to find someone that may be looking to get louder and then upgrade mine.

Pic of the new ride:

dmuellenberg

I put the Fusions on mine several years ago and have no complaints. Since they also have the bi-mode function, they can be closed during freeway driving and there is no drone with the valves closed.

Unreal

Besides reliability of fusions in 800+how setups, they are great.

RossG

Thanks for the responses.

Yarbie

My fusions are awesome. I have headers and hi flo cats and sounds like a nascar when i want and a vette when i dont.
get some!!!

meanjoe

Same here. I've had most of the other kinds of pipes on mine. Once I got the Fusion III's on that was the end of the testing period.
For sure, Get you some!

~STOLEN~

couldnt have said it better myself

Maxharvard

I have the bullets and they are pretty nice, only get a little drone around 1500rpm, other than that its great.

Must_Have_Z

You get that drone in open or closed mode?

Maxharvard

Mine only has open. Car came with the valved exhaust, but i found i always ran it open anyways. so I just ordered it with open exhaust.

jayyyw

ZR1 mufflers is also a good alternative.

Maxharvard

My car had them, my sway bar was too big, had to go with BB Bullets

Unreal

Then they were not installed correctly, as there should be no sway bar issues.

Maxharvard

You don't know my setup. But thanks for assuming.

furiousox

I have the gen 2 Fusion exhaust and in quiet mode it's just slightly louder than stock, though to my (very drone sensitive ears) it still drones a bit around 1500rpm, going uphill on the freeway there's still a bit more drone than stock in quiet mode. I have stock headers.

IMO ZR1 mufflers should be the best for a completely drone free experience in quiet mode

Unreal

Unless you have some custom sway bar, zr1 cans fit any sway bar made for a vette. ZR1, pfadt, etc etc. Doesn't matter the setup, they should have plenty of clearance if installed correctly.

~STOLEN~

pics or its BS

Maxharvard

Nope, off the shelf part...

Still think I'm lying?

~STOLEN~

lying, no

NOT explaining that "didnt work on mine" was referring to a COMPLETELY custom set up.....may be a little easier to understand.


but looks great !!!

Maxharvard

I wouldn't say it was "custom" as it's an off the shelf part that I literally bolted in... But it does work... so there's that