Snow or Alky meth system for procharger install?
05-21-2018, 09:27 PM
#1
Le Mans Master
Thread Starter
Member Since: Aug 2001
Location: Savannah GA
Posts: 6,070
Received 280 Likes
on
213 Posts
Cruise-In IV Veteran
Snow or Alky meth system for procharger install?
The snow kit seems more complete can someone give me some input on these systems? I know the alky kit is popular and uses the stock window washer tank which gives you a nice "low water" message.
STAGE 3 DI/BOOST COOLER INJECTION KIT | http://juicedmotorsports.com/snow320.html
https://www.alkycontrol.com/product-...7-corvette-kit
STAGE 3 DI/BOOST COOLER INJECTION KIT | http://juicedmotorsports.com/snow320.html
https://www.alkycontrol.com/product-...7-corvette-kit
The following users liked this post:
CorvetteBrent (05-22-2018)
05-22-2018, 10:48 AM
#2
Le Mans Master
I started with a snow kit and HAAATTTTTTED it. The connectors / fittings are garbage and they will leak on you. I switched to the Alky kit and haven't had one issue in two years. Knock on wood.
I used the washer tank for both kits. You can with either.
I used the washer tank for both kits. You can with either.
Last edited by C7&7; 05-22-2018 at 10:49 AM.
05-22-2018, 11:20 AM
#3
Former Vendor
ALKY control systems. Reliability and quality delivery during use have been excellent. Dual nozzle, map based for ProCharged setups do great.
https://horsepower-addicts.com/produ...-injection-kit
https://horsepower-addicts.com/produ...-injection-kit
05-22-2018, 12:08 PM
#5
Supporting Vendor
alky control is all i will do, we won't work on a car or tune a car with a snow kit
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
05-22-2018, 01:10 PM
#7
Le Mans Master
Thread Starter
Member Since: Aug 2001
Location: Savannah GA
Posts: 6,070
Received 280 Likes
on
213 Posts
Cruise-In IV Veteran
Well, that sums it up! Appreciate this feedback looks like MAF with dual nozzle Alky system is the way to go. What a forum...good stuff.
05-22-2018, 01:18 PM
#8
Supporting Vendor
05-22-2018, 01:56 PM
#9
Le Mans Master
Thread Starter
Member Since: Aug 2001
Location: Savannah GA
Posts: 6,070
Received 280 Likes
on
213 Posts
Cruise-In IV Veteran
Thanks Joe sorry didn't read it clearly first time around. This was perfect info just ordered the dual nozzle with MAP sensor. Thank you all.
Last edited by C5-VERT; 05-22-2018 at 02:34 PM.
