Euro tuners in Chesapeake/Norfolk area?
#1
Drifting
Thread Starter
Euro tuners in Chesapeake/Norfolk area?
My grandson just bought a '05 Audi 2.0 turbo with a bunch of performance mods. It runs good but i would like to have a good Audi shop go over the car. Seems to hardcore to me, 20 pounds boost and oil catch can bypassing pcv. Also has a slow coolant leak i can't find. He was just sent to Elizabeth City, North Carolina for training [Coast Guard] for 6 months. Know it's a vette forum but you guys are experts on a lot of automotive stuff. Thanks in advance.
The following users liked this post:
jpm995 (05-23-2018)
#3
Racer
I lived in Chesapeake for 4 years before moving to Williamsburg. I have seen a handful of spec'd Vettes, imports, and been to a few dyno days at All Aspects (auto or Motors?). Look them up at worst they WILL be able to get him in the right hands etc. locally here.
#4
Drifting
Thread Starter
Thanks will pass info to my grandson.
#5
Melting Slicks
Member Since: May 2006
Location: Williamsburg VA
Posts: 3,491
Received 514 Likes
on
300 Posts
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16
European Motors in Williamsburg has a top notch rep. Also, Auto Haus in Williamsburg and Yorktown seems to garner a lot of good feedback.
BTW, EM is the only place around here I will let touch Corvette wheels.
I have used them twice when even the dealers don't want to put runflats on a GS or C7!
BTW, EM is the only place around here I will let touch Corvette wheels.
I have used them twice when even the dealers don't want to put runflats on a GS or C7!
The following users liked this post:
jpm995 (05-23-2018)