ZR1 + Signature SV501 forged monoblock 18”x 3 sets!!
#1
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
ZR1 + Signature SV501 forged monoblock 18”x 3 sets!!
Several C7 ZR1s sold, First ZR1 Bluterek127 with SV501 18x11 18x12.5 installed (two more sets for back up too)
More pictures to come!!
Attachment 48352512
Attachment 48352513
Attachment 48352514
More pictures to come!!
Attachment 48352512
Attachment 48352513
Attachment 48352514
The following users liked this post:
Deity.Motorsports (05-24-2018)
#3
Pro
That is my car with the new wheels.
Very high quality wheels. Great shipping boxes, good protection.
We checked the fitment in jounce and droop and full steering angles. No issues with fitment.
Good people
to deal with.
Very high quality wheels. Great shipping boxes, good protection.
We checked the fitment in jounce and droop and full steering angles. No issues with fitment.
Good people
to deal with.
Last edited by GarryZR1; 05-24-2018 at 09:02 PM.
The following users liked this post:
Deity.Motorsports (05-24-2018)
#4
Pro
You might also be interested in how light they are compared to stock.
Stock front w/ Cup 2's are 55#, Rears are 65#
SV501 w/ Rival S are front 50 # each and rears are 54#
Stock front w/ Cup 2's are 55#, Rears are 65#
SV501 w/ Rival S are front 50 # each and rears are 54#
Last edited by GarryZR1; 05-24-2018 at 09:06 PM.
The following 4 users liked this post by GarryZR1:
The following users liked this post:
Deity.Motorsports (05-24-2018)
#9
Former Vendor
These look like a nice setup. Good offering!
The following users liked this post:
Deity.Motorsports (05-25-2018)
#10
Melting Slicks
#12
Melting Slicks
#14
Instructor
Correct me if I'm wrong, but Signature - BC Forged same same?
Taiwan mfg, not sure if that's good or bad
Taiwan mfg, not sure if that's good or bad
Last edited by HotHonda; 05-25-2018 at 12:06 PM.
#15
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
I hope my history of forged wheels on this forum speaks for itself. 200+ sets sold in 20 months just for Corvette alone. Most track their wheels hard, not one single track or street structure failure.
Do you realized biggest forging manufacture in the world, blank forgings, is supplied by Super Alloy. That is a Taiwanese company. Taiwan is. Oh a 3rd world country. It’s a first world and cost of living there is just as much here. Cars cost 3x as expensive there.
The following users liked this post:
ya3coub (06-05-2018)
#17
Pro
We plan to compete in the Optima BAttery - Ultimate Street Car Challenge. The stock Cup 2 are illegal due to 180 tread wear rating. The bigger size tires for Vettes that meet the rules are the BFG Rival S. They only come in 18" diameter. We did our research and best bang for the buck with a high quality track capable wheel were Signature wheels. We liked the looks of the SV501. Plus great people to deal with.
I still use the Cup 2's for other things or course.
I still use the Cup 2's for other things or course.
The following users liked this post:
Deity.Motorsports (05-25-2018)
#18
Awesome track wheels
even in 19/20
#19
Instructor
What are the sizes of the tires?