FS: Super victor ls7 efi | 4150
06-14-2018, 07:20 AM
#1
Racer
Thread Starter
Super victor ls7 efi | 4150
SOLD
$580 (new) used for mock up fitment only.
EDELBROCK SUPER VICTOR LS7 EFI INTAKE MANIFOLD 4150 FLANGE 28875
EDELBROCK 3649 SUPER VICTOR LS7 EFI FUEL RAIL KIT (STANDARD INJECTORS, -8 AN ENDS)
Holley EFI Throttle Body Intake Elbow
Uses standard height injectors (60mm O-ring center-to-center spacing).
Elbow is 105mm Throttle Body Opening
LS3 Style MAP Sensor Mounting
$580 (new) used for mock up fitment only.
EDELBROCK SUPER VICTOR LS7 EFI INTAKE MANIFOLD 4150 FLANGE 28875
EDELBROCK 3649 SUPER VICTOR LS7 EFI FUEL RAIL KIT (STANDARD INJECTORS, -8 AN ENDS)
Holley EFI Throttle Body Intake Elbow
Uses standard height injectors (60mm O-ring center-to-center spacing).
Elbow is 105mm Throttle Body Opening
LS3 Style MAP Sensor Mounting
Last edited by Steve Haefner; 06-21-2018 at 01:50 PM.
06-21-2018, 06:16 AM
#6
Racer
Thread Starter
Elbow height: 5.12"
Manifold height: A-8.42, B-8.42"; Carb pad height: 8.42". Carb height (CH) for this manifold is measured from the valley cover flange to the carb pad. Port exit dimensions machine matched: 1.34” x 2.38”
https://www.holley.com/products/fuel.../parts/300-240
http://www.edelbrock.com/automotive/...ictor-ls.shtml
Manifold height: A-8.42, B-8.42"; Carb pad height: 8.42". Carb height (CH) for this manifold is measured from the valley cover flange to the carb pad. Port exit dimensions machine matched: 1.34” x 2.38”
https://www.holley.com/products/fuel.../parts/300-240
http://www.edelbrock.com/automotive/...ictor-ls.shtml